Krell Industries HTS 2 Instructions For Use Manual page 45

When you enter this screen, you see the blinking cursor at STEREO. To select another
option
(DOLBY DIGITAL, DTS, DOLBY PRO LOGIC, STEREO, MUSIC1, MUSIC2)
press enter (83),
then use $ $ keys (80) to scroll through the options.
Select the desired mode, and press enter (83). The TRIM ADJUSTMENT screen appears:
KRELL HTS
-STEREO TRIM ADJUSTMENT-
H, 0 dB ~
OK
PRESS ENTER AND
USE 1" 4, TO CHANGE
MODE TRIM
The blinking cursor is on the 0 dB. Press enter (83). Use 1" $ keys (80) to select
appropriate trim adjustment (range is from -15 dB to +15 dB). Press enter (83) to
the selection.
Select OK and press enter (83) to return to the SELECT MODE screen. When all trims have
been adjusted as desired, select OK on the
SELECT
MODE screen and press enter (83).
You return to the LEVEL ADJUSTMENT screen.
Select Device Trim
The device trim is a master volume trim that is activated when an input device is
selected; it has a range of +/- 15
Select DEVICE TRIM and press enter (83). The SELECT DEVICE screen appears:
KRELL HTS
-SELECT DEVICE-
OK
PRESS ENTER AND
USE 1" 4, TO SWITCH
BETWEEN DEVICES
Krell Home Theater Standard
41