Krell Industries HTS 2 Instructions For Use Manual page 46

When you enter this screen, you see the blinking cursor at DVD. To select another option
(LD, SAT, VCR, TV, CD, TUNER, AUX1, AUX2, TAPE),
press enter (83), then use 1" $ keys (80)
to scroll through the options. Press enter (83). The
DVD TRIM ADJUSTMENT
screen
appears:
KRELL HTS
-DVD TRIM ADJUSTMENT-
I' 0dB~
OK
PRESS ENTER AND
USE 1" $ TO CHANGE
DEVICE TRIM
The flashing cursor is on the 0 dR. Press enter (83), then use 1" $ keys (80) to select
appropriate trim adjustment (range is from -15 dB to +15 dR). Press enter (83) to
the selection.
Select OK and press enter (83). You return to the
SELECT
DEVICE screen. Select OK and
press enter (83). You return to the LEVEL ADJUSTMENTS screen.
Select Analog Input Trim
IMPORTANT
An analog device must be selected for this option to function.
The
ANALOG INPUT
TRIM screen is used to measure the level of an analog input source to
the Home Theater Standard. When the
ANALOG
INPUT TRIM screen appears an upwardly
pulsing graphic meter is displayed. This meter is an on-screen equivalent of a signal
gain monitor.
KRELL HTS
-ANALOG INPUT TRIM-
DVD $1
0dR
I
-2 dB
-4 dB
-6 dB
INPUT ANTI
GAIN 0dR
CLIP ON
42 Krell Home Theater Standard