Krell Industries HTS 2 Instructions For Use Manual page 55

When the user button (24) is enabled to adjust the dynamic range of the HTS, you
can press and release the user button on the front panel to scroll through the
following dynamic range choices:
NORMAL
11 dB of compression
MAX
no compression
NIGHT
22 dB of compression
DTS A utoswitch
DTS AUTOSWITCH
OFF keeps
your Home Theater Standard operating in DTS mode, even
if the bit stream is interrupted. Bit stream interruptionnwhich can occur in some devices
when you press and release fast forward, track back/forward, or scan buttons for a
compact disc, digital videodisc, or laser discmcan cause potentially damaging bursts of
noise.
This menu allows you to select whether the DTS autoswitch is turned on or off. Krell
recommends that you leave the DTS autoswitch setting on (the default setting).
KRELL HTS
-DTS AUTOSWITCH-
ON
OK
To change DTS autoswitch setting:
1. Use the 1" 4, keys (80) on the remote control to select MORE on the OPERATION menu
screen, and press enter (83).
2. The MORE screen appears. Press the 1" $ keys (80) to select DTS AUTOSWITCH.
3. Use the 1" $ keys (80) to select DTS autoswitch OFF.
4. Select OK and press enter (83) to set the selection. Press the menu key (81) to exit.
Krell Home Theater Standard 51