Krell Industries HTS 2 Instructions For Use Manual page 32

Bass Range
The speaker setup screen also shows the bass ranges for the front, center, and rear
speakers. Options available are not bass limited
(FULL-RANGE) or
bass limited
(LIMITED).
The option you select depends on the low frequency capabilities of each speaker in
your system. See Modify Speaker Settings, below.
Note
The speaker setup screen shows the default settings for each speaker. If your system
corresponds to the default settings, select OK at the bottom of the menu screen, then
press enter (83). You retum to the main menu and can proceed to the next system
configuration, listening room setup.
Modify Speaker Settings
If the default settings do not correspond to your speakers, you can modify the speaker
settings, using the following steps:
Enable/Disable a Speaker
Use the direction keys (80) to select the speaker you wish to enable. Press enter (83)
select YES.
Use the direction keys to select the speaker you wish to disable. Press enter (83)
select NO.
Select Bass Range
To change the settings for the front, center, or rear speakers, use the direction keys to
highlight the speaker whose settings you wish to change and press enter (83). The
SPEAKER RANGE
screen appears:
KRELL HTS
-SPEAKER RANGE-
IFTHESESPEAKERS ARE NOT
DESIGNED TO REPRODUCE
DEEP BASS, PRESS ENTER
TO CHANGE STATUS
NOT BASS LIMITED
OK
Select NOT if the selected speaker can reproduce low frequencies (deep bass). Select
YES
if the selected speaker cannot reproduce deep bass.
28 Krell Home Theater Standard