Krell Industries HTS 2 Instructions For Use Manual page 51

Configure Music
The next item in the OPERATION menu, CONFIGURE MUSIC, allows you to determine which
music modes you want. Select CONFIGURE MUSIC and press enter (83). The MUSIC MODE
SETUP screen appears:
KRELL HTS
-MUSIC MODE SETUP-
MUSIC1
MUSIC2
OK
USE 1" $ TO SELECT
A MUSIC MODE
AND PRESS ENTER
Follow the on-screen directions, choosing MUSIC1 or MUSIC2.
You enter the select music type screen. When you enter this screen, you see a blinking
cursor.
KRELL HTS
-SELECT MUSIC1 TYPE-
I,I, ON STAGE
OK
PRESS ENTER AND
USE 1" $ TO SELECT
A MUSIC TYPE
The ON STAGE option is the example used here. Each selected option activates a
different virtual acoustic environment.
Select an
option (ON
STAGE, FRONT ROW, GENERAL ADMISSION, ORCHESTRA, MEZZANINE,
FULL RANGE AND SUB, MONO, ENHANCED STEREO, or PARTY),
by pressing enter (83),
then
use the $ ,[. keys (80) to scroll through the options. Press enter (83) to set the selection.
Select OK and press enter (83). You return to the MUSIC MODE SETUP screen. Select
MUSIC2 and repeat the process to choose a virtual environment.
Speakers active for each virtual environment are shown in the following table. If a
speaker is not present in your system, the signal is redirected to the ava.ilable speakers.
Krell Home Theater Standard 47