Calibrate Volume - Krell Industries HTS 2 Instructions For Use Manual

Note
Any speaker not configured in the speaker system setup menu displays N/A (not
available) for the distance specification.
3. CALIBRATE VOLUME
The third menu option, calibrate volume, allows you to calibrate each channel using the
Home Theater Standard's internal noise generator.
Note
A sound pressure level (SPL) meter is required for this procedure.
KRELL HTS
-MAIN MENU-
CONFIGURE SPEAKERS
LISTENING ROOM SETUP
I~) CALIBRATE VOLUME
CONFIGURE DEVICES
CONFIGURE LEVEL ADJUSTMENT
OPERATION
Use the $ $ keys (80) to highlight CALIBRATE VOLUME on the main menu and press enter
(83). The CALIBRATE VOLUME screen appears:
KRELL HTS
-CALIBRATE VOLUME-
SELECT THE CHANNEL
LEVEL CALIBRATION
METHOD
AUTO NOISE SEQUENCE
MANUAL NOISE SEQUENCE
PROGRAM MATERIAL
The auto noise sequence scrolls through the different speaker channels automatically,
allowing you to quickly calibrate channels. The manual noise sequence requires that
you select each channel before calibrating.
Highlight your preferred choice and press enter (83). The message INITIALIZING... blinks
while the Home Theater Standard loads its noise generator, or receives a signal from
external program material.
30
Krell Home Theater Standard