Setting up a Partnership
After ActiveSync installation is complete, the ActiveSync Setup Wizard helps the user to connect the
mobile computer to the host computer, set up a partnership to synchronize information between the
mobile computer and host computer and customize synchronization settings.
Before setting up a partnership between the mobile computer and host computer, see the
communication setup sections in this chapter for detailed information about Serial, USB and Ethernet
communication setups.
To set up a partnership:
1. If the Get Connected window does not appear on the host computer, select Start - Programs
- Microsoft ActiveSync - File - Get Connected.
2. Connect the mobile computer to the host computer using the appropriate Serial connection
(see
Chapter 10,
3. On the host computer, select Next in the Get Connected window.
Figure 4-1. Get Connected Window
Accessories).
4-5
Communications