Symbol Settings
Use the Symbol Settings window to set specific settings for the mobile computer.
Wakeups
The mobile computer can be configured to wakeup from sleep mode.
1. Tap Start - Settings - System tab - Symbol Settings icon - Wakeups tab.
Figure 3-50. Symbol Settings Window - Wakeups Tab
2. Select the Trigger, Any Key and/or Touch Panel check box in the Power Off or Auto Off list
box. See
Table 3-6
3. Tap ok.
Only the default (Trigger and Any Key) wakeup condition settings are retained
after a cold boot. However, all settings are maintained after a warm boot.
Status
Power Off
When the mobile computer goes into
sleep mode by pressing the Power
button, these actions wake the
mobile computer up.
for a list of wakeup conditions settings.
Table 3-6. Wakeup Conditions
Description
Trigger
Any Key
Touch Panel
Action
Conditions for wakeup
Trigger button is pressed.
Any key on the keypad is pressed.
Touch screen is tapped.
3-55
Settings