Introduction - Symbol MC9000-G Product Reference Manual

Introduction

In the MC9000-G RFID mobile computers, the 9000 Demo program includes the additional RFID
sample application. The RFID sample application is used to read/write/program RFID Gen2, Class 0
and Class 1tags.
If the demo program is not already running on the mobile computer, it can be launched from the
Application folder (Start - Programs - File Explorer - Application folder). The demo program files reside
in the Application partition on the mobile computer. If this partition was not loaded to the device, it
can be obtained from the Symbol Web site and loaded using TCM (see
Mobile Computer for instructions on using TCM).
The RFID demo (Gemini_RFID.exe) is not provided with source code. However, a sample,
named RFIDSample, is provided in the SMDK for C.
The screens and windows are provided for illustration purposes only and may differ
from actual screens.
The applications described may not be available on (or applicable to) all devices.
Procedures are not device specific and are intended to provide a functional overview.
For information about the other sample applications see
If the demo program is already on the mobile computer, tap Start - 9000 Demo. If the demo program
was downloaded into the Application directory on the mobile computer, navigate to the directory
using File Explorer and tap 9000 Demo. The Series 9000 Demo window displays.
Figure C-1. Series 9000 Demo Window
RFID Demo Program
Chapter 12, Configuring the
Appendix B, Demo Program.
C-3