Symbol MC9000-G Product Reference Manual page 498

B-30 MC9000-G with Windows
• Linear Sec sets the number of times a bar code is re-read to confirm an accurate decode.
Tap to toggle between Short, Redun (two times redundancy based on redundancy flags
and code length); Short, Codabar (two times redundancy if short bar code or CODABAR);
All codes *2 (two times redundancy for all bar codes); Long *2 Short *3 (two times
redundancy for long bar codes, three times for short bar codes); and, All codes *3 (three
times redundancy for all bar codes).
• Pointer Timer sets the maximum beam timer in milliseconds (0-60,000 in increments of
100ms) for pointer mode. A value of 0 means infinite time-out. Tap to select the beam
timer.
• Raster Height is not supported.
• Tap Interface Params to view and modify the values of the following interface parameters:
• Interface Type
• Power Settle Time
• Enable Settle Time
• Low Power Time.
• Tap Scan Params to view and modify the values of various scanner parameters.
• Tap Device Info to see the values of the following parameters:
• Beam Width
• Aim Mode
• Scan Direction
• Feedback
• Supported Fmts
• Max Image Rect.
• Tap Scanner Version to view the version numbers for the API, MDD, PDD, decoder and
hardware.
Refer to the SMDK Help File for Symbol Mobile Computers in the SMDK for C for details on the
available parameter options.
®
Mobile 2003 Software for Pocket PCs PRG