Battery Charging Indicators; Serial/Usb Connection - Symbol MC9000-G Product Reference Manual

Battery Charging Indicators

To charge the mobile computer's battery through the CAM, connect the power supply to the CAM (see
Figure 10-19 on page 10-28), then attach the CAM to the mobile computer. The mobile computer
begins charging automatically.
Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient
temperature range.
The mobile computer's amber charge LED, located in the Indicator LED Bar (see
3), shows the status of the battery charging in the mobile computer. See
charging status indications.
The battery usually charges in less than four hours, if the mobile computer is not in use.

Serial/USB Connection

The CAM can connect to and communicate with a serial/USB device, such as a printer or host
computer, through its serial port. See
communication setup procedure.
To connect the CAM to a serial/USB device, connect one end of the serial device cable into the serial
port on the CAM and the other end into the serial/USB port on the device.
Serial Communication Setup on page 4-9
Accessories
Figure 1-1 on page 1-
Table 1-1 on page 1-11
for the host computer
10-29
for