Introduction; Setting Up A Partnership; Mobile Computer Setup - Symbol MC3000 User Manual

Introduction

To communicate with various host devices, install Microsoft ActiveSync (version 3.7 or higher) on the host computer. Use ActiveSync
to synchronize information on the mobile computer with information on the host computer. Changes made on the mobile computer or
host computer appear in both places after synchronization.
ActiveSync software:
• Allows mobile computer-compatible host applications to be run on the mobile computer. ActiveSync replicates data from the
mobile computer so the host application can view, enter, and modify data on the mobile computer.
• Synchronizes files between the mobile computer and host computer, converting the files to the correct format.
• Backs up the data stored on the mobile computer. Synchronization is a one-step procedure that ensures the data is always
safe and up-to-date.
• Copies (rather than synchronizes) files between the mobile computer and host computer.
• Controls when synchronization occurs by selecting a synchronization mode, e.g., set to synchronize continually while the
mobile computer is connected to the host computer, or set to only synchronize on command.
• Selects the types of information to synchronize and control how much data is synchronized.

Mobile Computer Setup

The mobile computer can be set up to communicate either with a serial connection or a USB connection.
provides the accessory setup and cable connection information for use with the mobile computer. The mobile computer
communication settings must be set to match the communication settings used with ActiveSync.
1. On the mobile computer double-tap the Ctl Panel icon and double-tap Comm Settings to display the Comm Settings, window.
2. With Port highlighted, use the left
appropriate for the host computer, choose the default value of USB, or set to Serial1 @ 115200 (device dependant).
3. Tap OK to exit the Comm Settings window and tap X to exit the Control Panel window.
4. Proceed with installing ActiveSync on the host computer and setting up a partnership.
Figure 3-1. Comm Settings Window
and right arrow buttons to select the value. Select the Comm port setting
ActiveSync 3-3
Chapter 2, Accessories