Sony XDS-PD1000 Operation Manual page 85

Item number Item name
731 WIDE MODE
Sub-item
1 INPUT
2 OUTPUT
740 MASTER LEVEL (HD)
741 Y LEVEL (HD)
742 PB LEVEL (HD)
743 PR LEVEL (HD)
745 SETUP LEVEL (HD)
746 SYNC PHASE (HD)
747 FINE (HD)
a) When the optional PDBK-202 is installed.
b) Not displayed when the unit is in 23.98P mode.
Item number Item name
802 DIGITAL AUDIO MUTING IN
SHUTTLE MODE
Menu items in the 700s, relating to video control
Settings
a)
Specify whether to record and play back with the addition of wide picture
information.
Select whether to save wide picture information when recording.
auto: Automatically save wide picture information when it is detected in
the selected input video signal.
on: Always save wide picture information.
off: Never save wide picture information
Select whether to add wide picture information to the signal output when
down-converter output is set to squeeze mode.
through [thru]: Do not add.
auto: Add.
Notes
• To add wide picture information to the output signal, another setting is
required in addition to this item. In setup menu item 703, set line 16
(59.94i/59.94P/29.97P mode (J)), line 20 (59.94i/59.94P/29.97P mode
(UC)), or line 23 (50i/25P mode) to "throu".
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if the VITC insertion line is set to line 16 in setup menu
item 601 or 602.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if the VITC insertion line is set to line 20 in setup menu
item 601 or 602.
Adjust the high-definition video signal output from the HD-SDI OUTPUT
or HDMI OUTPUT connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 to 0 to 846
Adjust the Y level of the high-definition video signal output from the
HD-SDI OUTPUT or HDMI OUTPUT connectors.
–2048 to 0 to 846
Adjust the PB level of the high-definition video signal output from the
HD-SDI OUTPUT or HDMI OUTPUT connectors.
–2048 to 0 to 846
Adjust the PR level of the high-definition video signal output from the
HD-SDI OUTPUT or HDMI OUTPUT connectors.
–2048 to 0 to 846
Adjust the setup level of the high-definition video signal output from the
HD-SDI OUTPUT or HDMI OUTPUT connectors.
–272 to 0 to 272
Control the H sync phase of the high-definition video signal output from
the HD-SDI OUTPUT or HDMI OUTPUT connectors.
–128 to 0 to 127
Fine control the H sync phase of the high-definition video signal output
from the HD-SDI OUTPUT or HDMI OUTPUT connectors.
0 to 1023
Menu items in the 800s, relating to audio control
Settings
Set the audio muting conditions during shuttle playback.
off: Not muted.
on: Muted.
85
Setup Menu