Sony XDS-PD1000 Operation Manual page 105

During playback operations
Alarm message in status
display area
ILL. PLAY!
MEM. Empty!
This Clip cannot be Played
back.
Alarms related to operations in the clip list screen/copy operations
Alarm message in clip
list screen
Clip is Locked.
Copy Running!
Internal Error
Not Supported Format.
Copy Aborted.
Some Clips are Locked.
Clip Error.
The Disc Protect TAB is
Set to Save.
Irregular Disc is Used.
Use Professional Disc.
Disc Busy!
Set Appropriate IN/OUT
Points.
No Clip!
Cannot Expand this Clip.
Alarms relating to audio and video signals
Alarm message in status Alarm message in video monitor screen Description/action
display area
No INPUT! INPUT VIDEO IS NOT DETECTED.
CHECK THE VIDEO INPUT MODE AND
SUPPLY A VIDEO SIGNAL TO VIDEO
INPUT.
EMPHASIS! INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
REF Not Exist –
REF NON-STD A NON-STANDARD REF SIGNAL IS
BEING USED FOR REF VIDEO.
USE A STANDARD SIGNAL.
Alarm message in video monitor screen Description/action
ILLEGAL PLAYBACK.
MEMORY EMPTY !!
–
Description/action
The clip is locked.
This appears when an attempt is made to delete a clip, or set or clear a clip flag when the clip is
locked.
A copy operation is being performed, so another copy operation is not allowed.
The target operation failed because of generation of an internal error.
The format is not supported by this unit, so copy operation is impossible.
Copy Aborted.
The copy operation was aborted.
Some of the selected clips are locked (protected).
The clip is substandard, so the copy operation failed.
You have attempted to format a disc whose Write Inhibit tab is set so as to disable recording.
To execute formatting, set the Write Inhibit tab on the disc so as to enable recording.
The inserted disc cannot be recorded/played back on this unit.
Insert a disc that can be recorded / played back on this unit.
The disc is being used.
The settings of IN and OUT points for partial copy operation are not proper.
Check the IN and OUT point settings.
The clip selected for expansion has been deleted.
You have selected an unexpandable clip or file (such as a clip being recorded or an EDL file).
Normal playback is not possible.
Playback is not possible because a buffer underflow
has occurred in the playback buffer memory.
This clip cannot be played back because its format is
not supported by this unit.
No clips in the USER folder can be played back.
• Check the setting of V INPUT on page P1 INPUT of
the function menu (see page 42).
• Input an HD-SDI signal.
Check the emphasis of the audio input signal.
Input a reference signal.
Input a standard reference signal.
105
Troubleshooting