Sony XDS-PD1000 Operation Manual page 42

Item Setting
F5: MONITR R Selects the channel to monitor as the right
monitor channel.
CH1, CH2, CH3, CH4, CH5, CH6, CH7,
CH8
CH1/2, CH3/4, CH5/6, CH7/8 (MIX)
F6: OUT REF Selects the reference signal for the output
signals of this unit.
REF: Use the signal input to the REF.
VIDEO INPUT connector as the output
reference signal.
INPUT: Use the input video signal as the
output reference signal.
a) This is displayed only when TCG on page P4 TC of the function menu is
set to "INT", and PRST/RGN is set to "PRESET".
P1 INPUT page
Item Setting
F1: INT SG Set whether to select test signal from
internal signal generator.
OFF: Do not select.
ON: Select.
F2: V INPUT Selects the video input signal.
HDSDI: HD-SDI signal
SDSDI: SD-SDI signal
DVB-ASI: DVB-ASI TS signal
Notes
• Test signal is input when INT SG on this
page is set to "ON" and setup menu item
710 is set to anything other than "off".
• When the system frequency is 23.98P, the
setting is fixed "HDSDI".
• When "DVB-ASI" is selected, the setting
for audio input signal is fixed to "DVB-
ASI".
F3: A1 INPUT Selects the audio input signal to assign to
audio channel 1.
SDI: Audio signal embedded into SDI signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU1: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
DVB-ASI: DVB-ASI TS signal
Note
Test signals are input to all audio channels
1 to 8 when INT SG on this page is set to
"ON" and setup menu item 808 is set to
anything other than "off".
F4: A2 INPUT Selects the audio input signal to assign to
audio channel 2.
SDI: Audio signal embedded into SDI signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU2: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
DVB-ASI: DVB-ASI TS signal
42
Basic Operations of the Function Menu
Item
F5: A3 INPUT Selects the audio input signal to assign to
F6: A4 INPUT Selects the audio input signal to assign to
a) When the maintenance menu item M22: OPTION SETTING >DVB-ASI
is set to "ON" with the optional PDBK-202 being installed (see page 92).
P2 INPUT page
Item
F1: A5 INPUT
a)
F2: A6 INPUT
F3: A7 INPUT
a)
F4: A8 INPUT
a)
F5: –
F6: –
a) When the maintenance menu item M22: Option Setting >DVB-ASI is set
to "ON" with the optional PDBK-202 being installed (see page 92).
Setting
audio channel 3.
SDI: Audio signal embedded into SDI signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU3: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
DVB-ASI: DVB-ASI TS signal
audio channel 4.
SDI: Audio signal embedded into SDI signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU4: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
DVB-ASI: DVB-ASI TS signal
Setting
Selects the audio input signal to assign to
audio channel 5.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU5: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6 connectors
DVB-ASI: DVB-ASI TS signal
Selects the audio input signal to assign to
audio channel 6.
SDI: Audio signal embedded into SDI
signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU6: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6 connectors
DVB-ASI: DVB-ASI TS signal
Selects the audio input signal to assign to
audio channel 7.
SDI: Audio signal embedded into SDI
signal
ANALOG1: Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU7: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 7/8 connectors
DVB-ASI: DVB-ASI TS signal
Selects the audio input signal to assign to
audio channel 8.
SDI: Audio signal embedded into SDI
signal
ANALOG2: Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU8: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 7/8 connectors
DVB-ASI: DVB-ASI TS signal
(Unassigned function button)
(Unassigned function button)
a)
a)
a)
a)
a)
a)