Sony XDS-PD1000 Operation Manual page 76

Item number Item name
006 LOCAL FUNCTION ENABLE
013 SYSTEM FREQUENCY
SELECT MENU
027 SD CHARACTER
Sub-item
1 SD-SDI2
2 MONITOR SD
3 LCD/VGA
028 HD CHARACTER
Sub-item
1 HD-SDI2
2 MONITOR HD
031 RECORDING FORMAT
76
Setup Menu
Settings
Determine which recording and playback control buttons on the front panel
are enabled when this unit is controlled from external equipment via a
REMOTE (9P) connector.
all disable [dis]: All buttons and switches are disabled.
stop & eject [st&ej]: Only the STOP button and the EJECT button can
operate.
all enable [ena]: All buttons and switches are enabled.
Specify whether to enable switching the system frequencies (1080/59.94i,
50i, 29.97P, 25P, 23.98P or 720/59.94P, 50P).
off: Do not enable switching the system frequencies.
on: Enable switching the system frequencies.
For details about switching the system frequencies, see page 37.
Note
Settings for both basic and extended menu items are saved separately for
different system frequencies.
• 1080 59.94i/29.97P
• 1080 50i/25P
• 1080 23.98P
• 720 59.94P
• 720 50P
Therefore, when you switch system frequencies, all menu items are reset to
the current settings for the new mode. (They are different from the setting for
the previous mode.)
Specify whether to superimpose text information on the SD video signal.
a)
Specify whether to superimpose text information on the video signal output
from the SD-SDI OUTPUT 2 (SUPER) connector.
off: Do not superimpose.
on: Superimpose.
a)
Specify whether to superimpose text information on the video signal output
from the SD-SDI MONITOR OUTPUT or COMPOSITE OUTPUT 2
(MONITOR) connector.
off: Do not superimpose.
all: Superimpose on the outputs from both the above connectors.
comp: Superimpose on the output from the COMPOSITE OUTPUT 2
(MONITOR) connector.
sdi: Superimpose on the output from the SD-SDI MONITOR OUTPUT
connector.
Specify whether to superimpose text information over the display on the
front panel, and on the video signal output from the MONITOR (VGA)
connector.
off: Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information on the HD video signal.
Specify whether to superimpose text information on the video signal output
from the HD-SDI OUTPUT 2 (SUPER) connector.
off: Do not superimpose.
on: Superimpose.
Specify whether to superimpose text information on the video signal output
from the HD-SDI MONITOR OUTPUT connector.
off: Do not superimpose.
sdi: Superimpose.
Set the recording format.
HD422: HD422
420HQ: HD420HQ
IMX 50Mbps [IMX50]: IMX 50Mbps
DVCAM: DVCAM