Sony XDS-PD1000 Operation Manual page 106

Alarms relating to sensors and drivers
Alarm message in status
display area
FAN(1/2) Error
FAN(1/2) Warning
DC Power Warning
Power Unit(A/B) Err!
DR-FAN Stop
High TEMP!
High TEMP!
Low TEMP!
CF Warning
LASER 0 Lifetime
Alarms relating to the internal storage
Alarm message in status
display area
HDD(1/2/3) Warning
HDD(1/2/3) Fail
SSD(1/2/3) Warning
SSD(1/2/3) Lifetime
SSD(1/2/3) Fail
Rebuilding xx%
CONFIG MIS
106
Troubleshooting
Alarm message in video monitor screen Description/action
FAN(1/2) ERROR.
FAN(1/2) WARNING.
DC POWER STATUS IS NOT NORMAL.
PLEASE CONTACT SERVICE.
POWER SUPPLY UNIT(A/B) STATUS IS
NOT NORMAL. PLEASE CONTACT
SERVICE.
DRIVE FAN MOTOR STOPPED.
HIGH TEMPERATURE IN DRIVE.
HIGH TEMPERATURE.
LOW TEMPERATURE.
IT IS NESSESARY TO REPLACE CF
DISK. PLEASE CONTACT SERVICE.
DISC DRIVE LASER 0 LIFETIME HAS
ENDED.
PLEASE CONTACT SERVICE.
Alarm message in video monitor screen Description/action
ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING HDD NUMBER (1/2/3).
PLEASE CONTACT SERVICE.
HDD(1/2/3) FAIL.
PLEASE CONTACT SERVICE.
ERRORS OCCUR FREQUENTLY WHILE
READING/WRITING SSD NUMBER (1/2/3).
PLEASE CONTACT SERVICE.
SSD (1/2/3) LIFETIME HAS ENDED.
PLEASE CONTACT SERVICE.
SSD (1/2/3) FAIL.
PLEASE CONTACT SERVICE.
REBUILDING NOW.
PLEASE DO NOT TURN OFF.
INTERNAL STORAGE CONFIGURATION
MISMATCH.
Contact your Sony service or sales representative.
Note
The unit will not stop operating, but if you continue to
use it in this state, temperatures inside the unit will
rise, possibly resulting in failure or fire.
The unit is being used in a low-temperature
environment.
Note
The unit will operate, but the performance of the hard
disk drives will decline, possibly affecting recording or
playback.
Contact your Sony service or sales representative.
Note
The unit will operate, but if you continue to use it, the
CF disc may be damaged and all information may be
lost.
The lifetime of the Professional Disc drive laser has
come to an end.
Contact your Sony service or sales representative.
Errors are occurring frequently when reading or
writing an HDD (1, 2, or 3). The HDD must be
replaced.
Contact your Sony service or sales representative.
An HDD (1, 2, or 3) had malfunctioned. The HDD
must be replaced.
Contact your Sony service or sales representative.
Errors are occurring frequently when reading from or
writing to SSD (1/2/3). The SSD must be replaced.
Contact your Sony service or sales representative.
The lifetime of SSD (1/2/3) has come to an end. The
SSD must be replaced.
Contact your Sony service or sales representative.
The SSD (1/2/3) malfunctions. The SSD must be
replaced.
Contact your Sony service or sales representative.
Data is being rebuilt.
Do not power the unit off until the rebuild has finished.
Check whether the required number of SSD/HDD is
installed. If that does not solve the problem, contact
your Sony service or sales representative.