After-Sales Assistance - Unox XFT LineMiss Instruction Manual

After-sales assistance

In case of any malfunctions, disconnect the appliance from its power and water supply. Consult the solutions
proposed in the "Table C" .
Table C
Malfunction
The oven is completely
switched off.
No steam is produced in-
side the oven cavity.
After the time has been
button pressed, the oven
does not start.
Water escapes from the
seal while the door is
shut.
XFT
ly
) - Ita
e (PD .55 5
gh .57
ne 9 86
0 - Ca do 9 04 m
01 Fa x: +3 .co
.A . - 35 1 - w. un ox
S.p a, 22 .51
OX an .57 ww
UN jor 9 86 m
Ma 04 .co
Te l.:+ Via 39 un ox
in fo @
Possible cause
- No mains power.
- Appliance out of or-
der.
- Water inlet closed.
- Appliance plumbed
into the water mains
or the tank incorrect-
ly.
- No water in the tank
- Water supply filter
clogged with impuri-
ties.
Door open or not shut
properly.
- Seal is filthy.
- Seal is damaged.
- The handle mecha-
nism is loose.
If the solution is not listed in the table, contact a UNOX
authorized technical customer service. Provide the
following information:
- the date of purchase;
- the appliance data on the serial plate;
terface"
Manufacturer's information:
UNOX S.p.A.
Possible solution
Make sure the appli-
ance is connected to
the electricity mains.
Open water inlet.
- Make sure the ap-
pliance is plumbed
into the water mains
or the tank correctly.
- Fill the tank with
water.
- Clean the filter.
Make sure the door is
shut.
- Clean the seal using
a damp cloth.
- Contact a specialised
technician to re-
quest the necessary
repair work.
33
LineMiss
"Oven-user in-
Problem solution
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
Contact the Customer As-
sistance Service.
English
™