Huawei Ats Conference - TIPTEL IP 284 Manual

Enterprise IP Phone

HuaWei ATS Conference

Turn on this function can make Multi-Party Conference come true; you can add or
delete any attenders, also you can have a private chat with any member. This function
needs the server's support.
To enable ATS conference via web interface:
1) Choose Account->Account X->Advance->Conference Type, there is a pull-down
menu, choose ATS from the list.
2) Enter the Conference URI.
3) Press Confirm button to save the changes.
To establish a conference:
1) Press the Conf hot key during an active call.
2) Dial the number to conference in, then press the Send hot key
3) When the call is answered, press the CONF button.
4) After the CONF is established, initiator can continually add CONF members, press
Add hot key to enter into dial-up interface，enter the number，press send button
to dial out，when the people answer the call , he have been attended to the CONF.
5) Initiator can use private chart function to have a private chart with any member,
press PriChat, choose any members in phone member list, and then press PriChat
hot key, both sides enter into private chart mode, if there only 3 CONF members,
both sides begin to private chart and the third party enter a Hold mode. If the
attender is more than 3, and then the other attenders keep on talking. If you want
Using the Basic Call Functions
- 62 -