2-3: Sub/Noise - Korg Synthesizer User Manual

2–3: Sub/Noise
Here, you can make settings for the sub-oscillator and the noise generator.
The sub oscillator lets you select one of four basic waveforms. In the mixer section, the signal from
the sub oscillator is mixed with the signals of oscillators 1 and 2.
The noise generator produces white noise. The noise signal that is generated passes through a dedicated
filter, and is mixed by the mixer section with the signals from the sub oscillator and oscillators 1 and
2.
Noise Generator
2–3a
2–3b
2–3a: Sub Oscillator
Wave Form
Specifies the type of filter that will be applied to the output from the noise generator.
Saw
Thru
Low Pass
High Pass
Band Pass
Input Trim
Noise Filter
Cutoff Frequency
Resonance
Square Triangle
Filter Type
[Saw, Square, Triangle, Sine]
Sine
Prog.
Edit
P2