Korg Synthesizer User Manual page 37

Shape
Specifies the character of the table that will shape the input waveform. For details on how the waveform will
change, refer to the "Wave Shape" diagram ( page 16 of this manual) for the 01: Standard OSC.
AMS (Alternate Modulation Source)
Selects a modulation source ( page 64 of this manual) that will control "Wave Shape."
Intensity (Shape AMS Intensity)
Specifies the depth and direction of the effect of "AMS."
2–1f: Peaking EQ
Frequency
Specifies the center frequency of the range that will be boosted or attenuated by the Peaking EQ. Increasing this
value will raise the center frequency.
Q
Specifies the width of the Peaking EQ frequency band. Increasing this value will narrow the frequency band
that is boosted or attenuated.
Gain
Specifies the amount by which the range specified by "Frequency" and "Q" will be boosted or attenuated.
[0...99]
[OFF...MIDI (CC#83)]
[–99...+99]
[0...49]
[0...29]
[–18...+18]
Prog.
Edit
P2