Korg Synthesizer User Manual page 58

4–2c: Level Control
Velocity
Specifies the depth and direction of the effect that velocity will have on the level of the amp EG.
When " Velocity" is set to a positive (+) value
4–2d: Level Modulation
AMS (Alternate Modulation Source)
Selects a modulation source ( page 64 of this manual) that will control the level of the Amp EG.
Intensity (EG Level AMS Intensity)
Specifies the depth and direction of the effect that "AMS" will have on the level of the Amp EG.
4–2e: Time Modulation
AMS.1 (Alternate Modulation Source 1)
Selects a modulation source 1 ( page 64 of this manual) that will control the Amp EG times.
Intensity (EG Time AMS.1 Intensity)
Specifies the depth and direction of the effect that "AMS.1" will have on the Amp EG times.
AMS.2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( page 64 of this manual) that will control the Amp EG times.
At (Attack Time AMS.2 Intensity)
Dc (Decay Time AMS.2 Intensity)
Sl (Slope Time AMS.2 Intensity)
Rl (Release Time AMS.2 Intensity)
Specifies the depth and direction of the effect that "AMS.2" will have on each EG time.
When the various EG times are set to negative (–) values
Note-on
Note-off
Settings of the Amp EG
Note-on
Note-off
Settings of the Amp EG
Note-on
Note-off
Softly played notes
Note-on
Note-off
Softly played notes
[–99...+99]
Note-on
Note-off
Strongly played notes
[OFF...MIDI (CC#83)]
[–99...+99]
[OFF...MIDI (CC#83)]
[–99...+99]
[OFF...MIDI (CC#83)]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
Note-on
Note-off
Strongly played notes