6-2: Lfo 2; Lfo 3; Lfo 4 - Korg Synthesizer User Manual

6–1d: Amplitude Modulation
AMS (Alternate Modulation Source 1)
Selects a modulation source ( page 64 of this manual) that will control the amplitude of the LFO waveform.
Intensity (Amplitude AMS Intensity)
Specifies the depth and direction of the effect that "AMS" will have on the amplitude of the LFO waveform.
Offset
Specifies the center value of the LFO waveform.
Fade In Time
Specifies the time over which the amplitude of the LFO will increase from 0 until it reaches the maximum
value.
The parameter value
being modulated
The parameter value
being modulated
The parameter value
being modulated
6–2: LFO 2
AMSource
6–3: LFO 3
AMSource
6–4: LFO 4
AMSource
LFO 2, LFO 3, and LFO 4 have the same parameter as LFO 1. Refer to "6-1: LFO 1 "
Offset = 0
LFO movement determined
by Modulation Intensity
Offset = 50
LFO movement determined
by Modulation Intensity
Offset = -50
LFO movement determined
by Modulation Intensity
[OFF...MIDI (CC#83)]
[–99...+99]
[–50...+50]
[0...99]