Korg Synthesizer User Manual page 60

Decay (Decay Time)
Specifies the time from when the attack time ends until the Break Level is reached.
Slope (Slope Time)
Specifies the time from when the decay time ends until the Sustain Level is reached.
Release (Slope Time)
Specifies the time from note-off (when a note is released) until the Release Level is reached.
5–1c: Level Control
Velocity
Specifies the depth and direction of the effect that velocity will have on the EG levels.
When "Velocity" is set to a positive (+) value
5–1d:Level Modulation
AMS (Alternate Modulation Source)
Selects a modulation source ( page 64 of this manual) that will control the level of EG1.
Intensity (EG Level AMS Intensity)
Specifies the depth and direction of the effect that "AMS" will have on the EG levels.
5–1e: Time Modulation
AMS.1 (Alternate Modulation Source 1)
Selects a modulation source 1 ( page 64 of this manual) that will control the EG1 times.
Intensity (EG Time AMS.1 Intensity)
Specifies the depth and direction of the effect that "AMS.1" will have on the EG times.
AMS.2 (Alternate Modulation Source 2)
Selects a modulation source 2 ( page 64 of this manual) that will control the EG1 times.
At (Attack Time AMS.2 Intensity)
Dc (Decay Time AMS.2 Intensity)
Sl (Slope Time AMS.2 Intensity)
Rl (Release Time AMS.2 Intensity)
Specifies the depth and direction of the effect that "AMS.2" will have on each EG time.
When the various EG times are set to negative (–) values
Note-on
Note-on
Note-off
Softly played notes
Settings of EG1
Note-on Note-on
Note-off
Softly played notes
Settings of EG1
Note-on
Note-off
Note-off
Strongly played notes
[OFF...MIDI (CC#83)]
[OFF...MIDI (CC#83)]
[OFF...MIDI (CC#83)]
Note-on
Note-off
Note-off
Strongly played notes
[0...99]
[0...99]
[0...99]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]
[–99...+99]