Korg Synthesizer User Manual page 29

2–1b: Percussion Level
Specifies the volume level of the percussion effect for drawbar 1.
2–1c: Drawbar 2
The parameters are structured identically to those of "2-1a: Drawbar 1." Refer to "2-1a: Drawbar 1"
and "2-1b: Percussion Level."
2–1d: Drawbar 3
The parameters are structured identically to those of "2-1a: Drawbar 1." Refer to "2-1a: Drawbar 1"
and "2-1b: Percussion Level."
2–1e: Percussion Generator
Trigger
Use the radio buttons to specify how the percussion effect will be triggered.
With a setting of Single, the percussion effect will apply to the first-played note from a condition of no sound.
With a setting of Multi, the percussion effect will apply to each note that is played.
Decay
Specifies the decay length of the percussion. As this value is increased the decay time will become longer.
Level AMS (Level Alternate Modulation Source)
Selects a modulation source ( page 64 of this manual) that will control the percussion level of each drawbar.
Intensity (Level AMS Intensity)
Specifies the depth and direction of the effect of "Level AMS" on the percussion level.
[0...99]
[Single/Multi]
[0...99]
[OFF...MIDI (CC#83)]
[–99...+99]
Prog.
Edit
P2