Troubleshooting - Windster RA-7630SS User Manual

TROUBLESHOOTING

12
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
Light issue (All not
turning on)
Single LED fixture
defective (All not turning
on)
Loud Noise coming from
motor housing
Touch Panel Control
Switch not working
correctly
Burnt/melted control
switch
Speed levels not
working correctly
Unit lacking smoke
intake
Unit showing no power
indication
Unit making humming
noise / motor not
Starting
TROUBLESHOOTING
RA-76 Series
1. Locate and replace defective LED fixture.
2. Complete Control Board replacement may be
required
2. Replace defective LED fixture with new LED
fixture.
1. Confirm articles have not fallen near motor area or
in Motor Housing.
2. Ensure fans are strongly secure.
1. Complete control switch replacement is required.
2. Control Board Replacement may be required
1. Complete control switch replacement is required.
1. Complete control switch replacement is required.
2. Control Board replacement may be required.
1. Check ducting for foreign objects.
2. Ensure ducting is properly sealed.
3. Maintain Filter clean to increase airflow.
1. Make sure the power source is working properly.
2. Ensure all wiring is connected properly.
1. Replace defective capacitor with new one.
2. Check / replace defective motor.