Main Control Window Description - AOR AR2300 Operating Manual

4.4.1 MAIN CONTROL WINDOW DESCRIPTION

MODE
Left-click to manually select one of the 24 available modes.
Selecting AUTO is also possible.
Auto does also automatically select the IF BAND and STEP
values.
IF BAND
Left-click to manually select one of the 10 available IF filter
bandwidths.
STEP
Manually change the frequency step by hovering the mouse
over each digit and increasing or decreasing the value with
the mouse scroll wheel.
Min: 000.010k
Max:999.990k
FREQUENCY
(Min.: 0000.040000 MHz, max.: 3150.000000 MHz)
Change the receive frequency by either:
-Hovering with the mouse over each digit and scrolling the
mouse wheel up or down.
-Entering the frequency via the PC keyboard + ENTER key
for MHz.
-Entering the frequency via the PC keyboard + K key for
kHz.
-Using the left and right arrow key of the PC keyboard.
To set an OFFSET frequency, enter it via the PC keyboard
and validate with the SPACE BAR.
MAIN DIAL / OFFSET DIAL
Tune the frequency up or down by hovering the mouse
over either symbol and scrolling the mouse wheel up or
down.
Frequency step will be as set in the STEP menu.
The OFFSET symbol only appears if the offset function is
active.
AF
Adjust the volume from 000 to 255 by:
-Hovering your mouse over the 3 digits and scrolling the
mouse wheel up or down.
-Left-click on the 3 digits to adjust the AF slider and set the
audio channel balance when in OFFSET or DUAL BAND
mode.
SQL
Adjust the squelch level from 000 to 255 by:
-Hovering your mouse over the 3 digits and scrolling the
mouse wheel up or down.
-Use the keyboard up and down arrows.
RF Amp / Att
Left-click to select either:
-RF Amp: ON or OFF
-Att: 0, -10, or -20dB
-AUTO
9