Before You Start - Danfoss FP975 Installation & User's Instructions

Before you start

Open the fl ap on the front of the clock. Press the RESET (R/S)
button using a non-metallic object (e.g. pencil/matchstick) until
you hear a click and the red light on the front of the unit fl ashes
once.
This will reinstate the preset
programmes and sets the time to
12.00pm on Monday (MO).
Choice of 24hr or AM/PM display
Press and hold DAY & NEXT ON/OFF
for 1.5 seconds to toggle between
24hr clock and AM/PM display, as
required.
Setting the correct Time and Day
SETTING THE TIME
Press PROG once.
The words SET TIME will appear at
the top of the display & the time will
fl ash on and off.
Use the + and - buttons to set the
correct time (press and hold to
change in 10 min increments).
22