Running Your Programme - Danfoss FP975 Installation & User's Instructions

Running your Programme

To run the central heating programme: press the
SELECT button next to the radiator symbol.
To run the hot water programme: press the SELECT
button next to the tap symbol.
As you press the SELECT button
the display will change between
ON, OFF, ALLDAY and AUTO.
AUTO = the heating/hot water will come on and
go off at the programmed times.
ON = the heating/hot water will remain on
constantly.
OFF = the heating/hot water will not come on.
ALLDAY = the clock will turn the heating/hot water
on at the fi rst programmed ON and will leave it on
until your last programmed OFF.
Select the option you require depending on your
circumstances, time of year, etc.
30
N
FF
ALLDAY