Installation Reference - HP 340 Series Service Manual

Installation Reference
The workstation has step-by-step procedures for installing each part. An Installation Card is a
pictorial set of instructions to show installers how to unpack, connect, and power up the SPU,
disc drive, and monitor. More detailed information is contained in the Installation Reference.
To install the operating system and/or application program, the docuInents supplied with these
software products should be referred to.
Organization of the Installation Reference is:
Chapter No. and Title
Chapter 1: Introduction
Chapter 2: Installing Your
Computer
Chapter 3: Installing Accessories
Chapter 4: Installing Your
Key board and Monitor
Chapter 5: Installing HP-IB
Peripherals
Chapter 6: Installing Non-HP-lB
Peri pherals
Chapter 7: Reading the Self-Test
Reference
Glossary
14
Product Infonnation
Contents
Covers how the guide is organized and explains some SPU
fundamentals.
Includes procedures on positioning the SPU, checking volt-
age settings, connecting power cords, and turning on the
SPU.
This chapter covers accessory configuration and
installation.
This chapter covers keyboard and rnonitor installation.
Standard HP-IB peripheral configuration and connection
procedures.
Peripheral configuration and connection procedures other
than HP-IB.
Covers procedures performed by self-test and how to in-
terpret the results of the self-tests. Error messages are
explained and help is provided should the user get into
trou ble at this point.
This chapter has information regarding internal configu-
ration switches, running extended tests, Boot ROM error
messages and tutorial information on data communications
and interfacing.
Provides explanations of COlllputerese terms and phrases.