Led Indicators (Crd5501-4001Er); Ethernet Cradle Drivers - Motorola MC67 Integrator Manual

2 - 12 MC67 Integrator Guide
On the first Four Slot Ethernet cradle, lift or remove the label flap and connect a second Ethernet cable to
3.
the Secondary Port. See
Connect the other end of the Ethernet cable to the Primary Port of the second Four Slot Ethernet cradle.
4.
Connect additional cradles as described in step 3 and 4.
5.
Secondary Port
Daisychaining Four Slot Ethernet Cradles
Figure 2-11

LED Indicators (CRD5501-4001ER)

There are two green LEDs on the front of the cradle and two green LED on the Primary port on the back of the
cradle. These green LEDs light and blink to indicate the data transfer rate. When the LEDs are not lit the
transfer rate is 10 Mbps.
CRD5501-4001ER LED Indicators
Table 2-4
Data Rate
1 Gbps
100 Mbps
10 Mbps

Ethernet Cradle Drivers

The MC67 includes Ethernet cradle drivers that initiate automatically when you place the MC67 in a properly
connected Four Slot Ethernet cradle. After inserting the MC67, configure the Ethernet connection:
Tap > Settings > Connections tab >WiFi icon. The Configure Network Adapters window appears.
1.
Figure 2-11.
Left LED Right LED
To Switch To Power Supply
Left 1000 LED (Green)
On/Blink
Off
Off
Primary Port To Power Supply
Right 100 LED (Green)
Off
On/Blink
Off