Manually Configuring A Data Connection - Motorola MC67 Integrator Manual

4 - 2 MC67 Integrator Guide
Ensure an activated SIM card, from the phone service provider, is installed in the MC67.
1.
NOTE The SIM card must be enabled to connect to the network
Verify active phone and data services by tapping the Status bar and then
2.
The Carrier name appears in the dialog box.
Connectivity Dialog
Figure 4-1
Verify SIM card functionality:
3.
Tap > Settings > Personal > Phone > Network.
a.
Phone Settings - Network
Figure 4-2
Ensure the service provider's network appears in the Current network: field.
b.
If the network does not appear, tap Find Network. If the network still does not appear, verify that the
c.
SIM card was installed correctly. If it was, and no network appears, contact the service provider.

Manually Configuring a Data Connection

If a data connection is not automatically configured, manually configure the data connection:
Acquire an Access Point Name (APN) from the service provider.
1.
Tap > Settings > Connections > Connections > Tasks.
2.
.
to display the Phone dialog.