Table of Contents
Advertisement
7.6 D.M Test Introduction ：
1. After enter the D.M...Select and execute:
a. Using the jog wheel previous/next to select the test items, press the jog wheel for execution.
b. Using HyperTerminal input the number represent the test items to execute or enter the sub menu.
c. Using Touch pen to select by clicking directly.
2. Select items for test:
a. Using the record button to select the test items for loop once or loop forever. A green optic bundle following with the item
string indicates selection status.
b. Using HyperTerminal, the item with green background is selected.
c. Using touch pen to choose directly. The selected item will show with green background.
When one item is selected, selection again on it will make it unselected. Press " button1 " to exit the current menu.
3. After the system finish the first cycle test,press "Record Button",until it was displayed as "Hot-key 1 to leave".Then press
"Button1" to return Main Menu.
4. You may also connect the serial port to the host PC, and control the self-diagnostic by application HyperTerminal .( Please
referenced chapter 6 for Detail setting. )
Barracuda PDA Maintenance
Main Menu
Message Display
98
Advertisement
Table of Contents
