Table of Contents
Advertisement
Barracuda PDA Maintenance
2.3.3 Memory PCB Board
Disassembly
1. Remove the Battery Pack. (See section 2.3.1 Disassembly)
2. Remove the Rear Cover. (See section 2.3.2 Disassembly)
3. Slight lift up the "Memory PCB Board" from the "PDA Memory PCB Board connector". (Figure 2-6)
4. Now you can separated the Memory PCB Board from the PDA. (Figure 2-7)
Figure 2-6 Lift up the Memory PCB Board
Figure 2-7 Separated the Memory PCB
Board from the PDA
Reassembly
1. Carefully connect the memory PCB Board back to the PDA M/B. (Figure 2-6)
2. Reassembly the Rear Cover. (See section 2.3.2 Reassembly)
3. Reassembly the Battery Pack. (See section 2.3.1 Reassembly)
62
Advertisement
Table of Contents
