NEC Barracuda Service Manual page 61

2.3.1 Battery Pack
Disassembly
1. Carefully put the PDA upside down.
2. Remove the STYLUS. (Figure 2-1)
3. Carefully push the Battery Pack security lock to the "unlock"( ) position ( ), then pull the Battery cover out of
the PDA compartment. (Figure 2-2)
4. Remove the Battery Pack. (Figure 2-3)
Figure 2-1 Remove the STYLUS
Reassembly
1. Push the Battery Pack into the compartment. Make sure the Battery pack is connected correctly. (Figure 2-3)
2. Slightly push the Battery pack cover into the PDA compartment. And push the "Battery Pack security lock" to
the "lock" position. (Figure 2-2)
3. Put the STYLUS back. (Figure 2-1)
Barracuda PDA Maintenance
Figure 2-2 Unlock the Battery Pack latch
Figure 2-3 Remove the Battery Pack
60