Table of Contents
Advertisement
Barracuda PDA Maintenance
2.3.5 Front Cover
Disassembly
1. Remove the Battery Pack. (See section 2.3.1 Disassembly)
2. Remove the Rear Cover. (See section 2.3.2 Disassembly)
3. Remove the Memory PCB Board . (See section 2.3.3 Disassembly )
4. Remove the Mother Board PCB. (See section 2.3.4 Disassembly )
5. Remove two screws. (Figure 2-13)
6. Place the PDA upside down and carefully separated the Front Cover latch from the PDA. (Figure 2-14)
Figure 2-13 Remove two screws
Figure 2-14 Remove the front cover
Reassembly
1. Put the Front cover back to the PDA and make sure these latch positions are assembly well. (Figure 2-14)
2. Place the PDA upside down and secured two screws. (Figure 2-13)
3. Reassembly the Mother Board PCB. (See section 2.3.4 Reassembly)
4. Reassembly the Memory PCB Board . (See section 2.3.3 Reassembly)
5. Reassembly the Rear Cover. (See section 2.3.2 Reassembly)
65
6. Reassembly the Battery Pack. (See section 2.3.1 Reassembly)
Advertisement
Table of Contents
