NEC Barracuda Service Manual page 69

Barracuda PDA Maintenance
2.3.8 Compact Flash Type Ⅱ E Sled
Disassembly
1. Place the Compact Flash Sled upside down.
2. Remove six screws and the cover. (Figure 2-20)
3. Remove three screws and disconnected the battery cable. (Figure 2-21)
4. Lift up the Compact Flash PCB out of the compartment. (Figure 2-22)
Figure 2-21 Remove three screws and
Figure 2-20 Remove six screws Figure 2-22 Lift up the Compact
disconnected the battery cable
and the cover. Flash PCB Board
Reassembly
1. Replace the Compact Flash PCB Board into the compartment and secured three screws. (Figure 2-21)
2. Replace the cover and secured six screws. (Figure 2-20)
68