NEC Barracuda Service Manual page 64

Barracuda PDA Maintenance
2.3.4 Mother Board PCB
Disassembly
1. Remove the Battery Pack. (See section 2.3.1 Disassembly)
2. Remove the Rear Cover. (See section 2.3.2 Disassembly)
3. Remove the Memory PCB Board . (See section 2.3.3 Disassembly)
4. Remove two screws. (Figure 2-8)
5. Carefully separated the three lock positions from the M/B. (Figure 2-9)
6. Carefully lift up the M/B. (Figure 2-10)
Figure 2-8 Remove two screws Figure 2-10 Lift up the M/B
Separated the three
Figure 2-9
lock positions
.
63