NEC Barracuda Service Manual page 84

3. Use the combination key (Press and hold the Jog-Wheel down and then press the Reset button) to enter D.M. and
select "Yes" to enter the bootloader mode.
4. Plug the USB sync cable, and make sure the cable was connected well with your desktop PC and Barracuda.
5. Start the upgrade by selecting USB as your interface, and you will see "Receive Image ......".
6. Start the CEUpdate program on your PC, and select the correct image you want to upgrade, the filename must be
"WinCEIMG.BIN".
7. Select USB as your upgrade interface.
8. Select "0" as your offset setting.
9. Press the "Go" button to start the upgrade process.
10. Now the program on PC is transferring the image to Barracuda device, just waiting. If any error message printed,
refer the message printed for help.
11. While the transmission completed, some messages printed on screen show all data transferred. The program on PC
will now terminated.
12.After checked the image file, upgrade started. Do not stop it until upgrade process complete.
B. CompactFlash:
1. Because of the Flash ROM size of Barracuda are 32MB, so before you use the CompactFlash to upgrade Pocket PC
image. Please make sure the free capacity of your CompactFlash memory card is more than 32MB.
2. Download the correct image from FTP site, and please make sure the language and version is correct. ( WWE for
World Wide English, FRA for French, GER for German, ITA for Italian )
3. Before you copy the image file to your CompactFlash, please make sure the data format of your CompactFlash
memory card is FAT16. If not, please convert it to FAT16.
4. Copy the image file to your CompactFlash memory card and rename it to "WinCEIMG.BIN".
.
Barracuda PDA Maintenance
83