NEC Barracuda Service Manual page 62

Barracuda PDA Maintenance
2.3.2 Rear Cover
Disassembly
1. Remove the Battery Pack. (See section 2.3.1 Disassembly)
2. Remove Four Screws. (Figure 2-4)
3. Carefully separated the Rear cover latch from the PDA. And slightly lift up the Rear cover. (Figure 2-5)
Figure 2-4 Remove four screws Figure 2-5 Remove the Rear cover
Reassembly
1. Replace the Rear cover and make sure all latch positions are assembly well. (Figure 2-5)
2. Secured four screws to fasten down the Rear Cover. (Figure 2-4 )
3. Slightly push the Battery pack into the compartment. (See section 2.3.1 Reassembly)
61