Install The Device - Tenda AC1200 User Manual

RST/WPS
DC
ON/OFF

2. Install the device


Connect the included power adapter to your router and turn on the router.

Connect your computer to your router. (You can also wirelessly connect the router to one wireless device by
connecting to its SSID—wireless network name, and then enter the default username and password admin/admin, for
entering the management web to configure the router. SSID and default username/password, see the bottom label of the
router.)

Connect your router to the Internet. Choose ADSL Mode or Ethernet Mode according to your actual Internet service
type.
Press it for 1-3 seconds to enable WPS-PBC feature;
Press it for 8 seconds to restore all configurations to factory defaults.
Used to connect to the power adapter, which is included in the package.
Power switch to turn the router on or off.
Wireless AC1200 ADSL2+ Dual Band Modem Router
5