Tenda AC1200 User Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Wireless Router
  5. AC1200
  6. User manual

Tenda AC1200 User Manual

Wireless adsl2+ dual band modem router
Hide thumbs Also See for AC1200:
Table of Contents

Advertisement

Quick Links

Wireless AC1200 ADSL2+ Dual Band Modem Router
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC1200 and is the answer not in the manual?

Questions and answers

Related Manuals for Tenda AC1200

Summary of Contents for Tenda AC1200

  • Page 1 Wireless AC1200 ADSL2+ Dual Band Modem Router...

  • Page 2: Copyright Statement

    Tenda reserves the right to make changes to the products without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of the product described herein.

  • Page 3: Table Of Contents

    Wireless AC1200 ADSL2+ Dual Band Modem Router Contents Chapter 1 Get to Know Your Router ............................. 1 1. What it does ................................1 2. Product Features ................................ 1 3. Package Contents ..............................2 Chapter 2 Hardware Install ..............................3 1. LED Indicators, Buttons and Interfaces ........................3 2.

  • Page 4: Table Of Contents

    Wireless AC1200 ADSL2+ Dual Band Modem Router 5. Management ................................149 5.1 Settings ................................ 149 5.2 System Log ..............................151 5.3 SNMP Agent ............................... 152 5.4 Internet Time ............................... 153 5.5 Access Control ............................154 5.6 Update Firmware ............................155 5.7 Reboot .................................

  • Page 5: Chapter 1 Get To Know Your Router

    1. What it does The Wireless AC1200 ADSL2+ Dual Band Modem Router provides you with an easy and secure way to set up a wireless home network with fast access to the Internet over a high-speed digital subscriber line (DSL). Complete with a built-in ADSL modem, it is compatible with all major ADSL Internet service providers.

  • Page 6: Package Contents

    Other Advanced Features: IPv6, DDNS, virtual server, DMZ, port triggering, IP filter, MAC filter and UPnP, etc. Tenda Setup Wizard for easy and fast installation and configuration Tenda Green: Use hardware Power On/Off and software WiFi On/Off buttons to turn on and off power and WiFi to save energy when not in use 3.

  • Page 7: Chapter 2 Hardware Install

    Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 2 Hardware Install You can also set up your new router instead of using the Install Guide that comes in the box. This chapter walks you through the hardware install. 1. LED Indicators, Buttons and Interfaces...

  • Page 8: Back Panel

    Wireless AC1200 ADSL2+ Dual Band Modem Router Solid Client connected successfully. Blinking WPS LED starts blinking if you press the WPS button on the device or interface. No wireless clients are connected. WPS LED turns off after blinking for 2 minutes.

  • Page 9: Install The Device

    Wireless AC1200 ADSL2+ Dual Band Modem Router Press it for 1-3 seconds to enable WPS-PBC feature; RST/WPS Press it for 8 seconds to restore all configurations to factory defaults. Used to connect to the power adapter, which is included in the package.
  • Page 10 Wireless AC1200 ADSL2+ Dual Band Modem Router No need to use a telephone: Directly connect the DSL line to the DSL port of your router. Use the splitter as a medium: ADSL Mode 1) Connect the DSL line from the Internet side to the LINE port of the splitter;...

  • Page 11: Chapter 3 Quick Internet Setup

    Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 3 Quick Internet Setup This chapter instructs you to quickly set up your Internet connection. 1. Log in to Web Manager Preparation for logging in to web manager:  Method 1: Using Resource CD ...
  • Page 12 Wireless AC1200 ADSL2+ Dual Band Modem Router Login:  Enter admin in both the Login Username and Password fields if you access the router for the first time and then click Login to enter the home page. If you change the login username and password and forget them, press the RST/WPS button on the device for at least 8 seconds to reset the router, and then enter the home page with the default name and password “admin”...

  • Page 13: Internet Setup

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2. Internet Setup 2.1 ADSL Mode  Connection Mode: Select ADSL mode.  Country: Select your country.  ISP: Select your ISP.  VPI/VCI: This two fields will be populated automatically if you select a correct country and ISP.

  • Page 14: Ethernet Mode

    Wireless AC1200 ADSL2+ Dual Band Modem Router DNS server. This information should have been provided to you by your ISP. If a secondary DNS server address is available, enter it also. Enter the assigned IP address, subnet mask, and the IP address of your ISP’s primary...
  • Page 15 Wireless AC1200 ADSL2+ Dual Band Modem Router Connection Type ISP Information Dynamic IP No entries are needed. Enter the Internet info (IP address, subnet mask, gateway and DNS server address) IPoE Static IP provided by your ISP. Enter the username and password provided by your ISP.

  • Page 16: Test Internet Connectivity

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.3 Test Internet Connectivity If Connection Status shows Connected shown as below, you access the Internet now. Try to launch a web browser and enter www.tendacn.com. If the webpage displays properly, you are successfully...

  • Page 17: Chapter 4 Advanced Settings

    Wireless AC1200 ADSL2+ Dual Band Modem Router Chapter 4 Advanced Settings If you prefer configuring your modem router for unique situations, consult this chapter to know advanced features. Click on the home page to enter the screen below. 1. Device Info 1.1 Summary...

  • Page 18: Statistics

    Wireless AC1200 ADSL2+ Dual Band Modem Router 1.2 WAN Here you can view the WAN Information including Interface, Description, Type, IGMP, NAT, Firewall, Status, IPv4 Address as seen in the screenshot. 1.3 Statistics Here you can view the packets received and transmitted on LAN and WAN ports.
  • Page 19 Wireless AC1200 ADSL2+ Dual Band Modem Router Statistics--WAN: Displays the packets received and transmitted on the WAN (eth0.1) port as seen in the screenshot below. Statistics-xDSL: Displays the packets received and transmitted on the DSL port.

  • Page 20: Route

    Wireless AC1200 ADSL2+ Dual Band Modem Router 1.4 Route Here you can view the route table as seen in the screenshot: 1.5 ARP Here you can view the IP and MAC addresses of the PCs that attach to the device either via a wired or wireless connection as seen in the screenshot.

  • Page 21: Advanced Setup

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2. Advanced Setup 2.1 Layer2 Interface Click Advanced Setup > Layer2 Interface to enter the Layer2 Interface screen. This modem router provides two Layer2 Interfaces: - ATM Interface for ADSL broadband Internet service. (By default, system applies the ATM Interface (ADSL uplink).) - ETH Interface for connecting to the Internet via an Ethernet cable.
  • Page 22 Wireless AC1200 ADSL2+ Dual Band Modem Router  Go to 2.2.1 For ATM Interface to configure the WAN service for Internet access. If you are unsure about the VPI/VCI parameters, see Appendix 4 VPI/VCI List, or ask your ISP to provide it.

  • Page 23: Wan Service

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.1.2 To set up the ETH interface  Select ETH Interface and click Add.  Select eth0/eth0 in the box to function as a WAN port. Only one LAN port can be configured as the WAN port at a time.
  • Page 24 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.2.1 For ATM Interface Following 11 modes are for you to choose according to your actual Internet service. PPPoE IPv4 Only IPv4&IPv6(Dual Stack) IPv6 Only IPoE IPv4 Only IPv4&IPv6(Dual Stack) IPv6 Only Bridging...
  • Page 25 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish PPP Username and Password and other settings on the figure below. Click Next. PPP Username/ Password: Enter your PPP username and password. If you cannot locate this information, ask your ISP to provide it.
  • Page 26 Wireless AC1200 ADSL2+ Dual Band Modem Router your ISP or select AUTO. MAC Clone: When you cannot access the Internet after finishing other settings here except this option, consider whether it’s the matter of the MAC address of your computer. Clicking Clone MAC button copies the MAC address of your computer to the modem router.
  • Page 27 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP.
  • Page 28 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.  Steps 1~6 above for PPPoE and IPv4 Only users --------------------------------------------------------------------------------------------------------------------------- 2) PPPoE IPv4&IPv6 (Dual Stack) Users If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up WAN service for accessing the Internet.
  • Page 29 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next.  Configure PPP Username and Password and other settings on the figure below. Each field with its indication is ...
  • Page 30 Wireless AC1200 ADSL2+ Dual Band Modem Router If ISP provides you with the static IPv4 and IPv6 address, configure the static IP addresses by checking Use Static IPv4 Address and Use Static IPv6 Address and enter the static IPv4 and IPv6 address.
  • Page 31 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.
  • Page 32 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.
  • Page 33 Wireless AC1200 ADSL2+ Dual Band Modem Router  Steps 1~6 above for PPPoE and IPv4&IPv6 (Dual Stack) users ------------------------------------------------------------------------------------------------ 3) PPPoE IPv6 Only Users If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up WAN service for accessing the Internet.
  • Page 34 Wireless AC1200 ADSL2+ Dual Band Modem Router  Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in PPPoE and IPv4 users section. If ISP provides you no static IPv6 address, you just keep the default settings DHCP mode.
  • Page 35 Wireless AC1200 ADSL2+ Dual Band Modem Router If ISP provides you with the static IPv6 address, configure a static IP address by checking Use Static IPv6 Address and enter the static IPv6 address.
  • Page 36 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next.  To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP.
  • Page 37 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.  Steps 1~6 above for PPPoE and IPv6 Only users...
  • Page 38 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.  Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol: IPv4 Only.
  • Page 39 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The...
  • Page 40 Wireless AC1200 ADSL2+ Dual Band Modem Router  To finish DNS Server Configuration, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by your ISP.
  • Page 41 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv4 Only users ------------------------------------------------------------------------------------------------------------------------------- 5) IPoE IPv4&IPv6 (Dual Stack) Users If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask and the gateway IP address, you need to select the IP over Ethernet (IPoE).
  • Page 42 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select IP over Ethernet. Edit the Enter Service Description which is optional. Suggest you keep the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next.  To finish WAN IP Settings, select Obtain an IP/IPv6 address automatically, check Dhcpv6 Prefix Delegation (IAPD).
  • Page 43 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.
  • Page 44 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. Note If Obtain an IP address automatically is chosen, DHCP will be enabled for PVC in IPoE mode.
  • Page 45 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv4&IPv6 (Dual Stack) Users...
  • Page 46 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select the IPoA interface you added just now from the pull-down menu in the figure below. Click Next.  Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the...
  • Page 47 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish WAN IP Settings on the figure below. Click Next.  Finish Network Address Translation Settings. Suggest keeping the default settings. Click Next.  To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the...
  • Page 48 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP.
  • Page 49 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv6 Only Users...
  • Page 50 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select Bridging. Edit the Enter Service Description field which is optional. Suggest you keep the default. Click Next.  Click Apply/Save to save your settings if everything is correctly set.
  • Page 51 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the Bridge connection is successful, you can access the Internet.  Steps 1~3 above for Bridging Users --------------------------------------------------------------------------------------------------------------------------------------------------- 8) PPPoA IPv4 Only Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.
  • Page 52 Wireless AC1200 ADSL2+ Dual Band Modem Router  Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol you need: IPv4 Only. Click Next.  Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next.
  • Page 53 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The default setting is recommended.
  • Page 54 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.
  • Page 55 Wireless AC1200 ADSL2+ Dual Band Modem Router  Steps 1~6 above for PPPoA and IPv4 Only Users -------------------------------------------------------------------------------------------------------------------------- 9) PPPoA IPv4&IPv6 (Dual Stack) Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.
  • Page 56 Wireless AC1200 ADSL2+ Dual Band Modem Router  Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next.
  • Page 57 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.
  • Page 58 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.
  • Page 59 Wireless AC1200 ADSL2+ Dual Band Modem Router  Steps 1~6 above for PPPoA and IPv4&IPv6 (Dual Stack) Users ----------------------------------------------------------------------------------------------- 10) PPPoA IPv6 Only Users After you configure the ATM Interface (ADSL uplink) and select PPPoA as the DSL link type, you can start to set up WAN service for accessing the Internet.
  • Page 60 Wireless AC1200 ADSL2+ Dual Band Modem Router  Set PPP Username and Password on the figure below. Suggest keeping other options default. Click Next.  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway...
  • Page 61 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next. ...
  • Page 62 Wireless AC1200 ADSL2+ Dual Band Modem Router Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoA connection is successful, you can access the Internet.  Steps 1~6 above for PPPoA and IPv6 Only Users...
  • Page 63 Wireless AC1200 ADSL2+ Dual Band Modem Router  Edit the Enter Service Description. This field is optional. Suggest to keep the default name. Click Next.  Set the WAN IP address and subnet mask provided by your ISP.  Finish Network address translation settings. Suggest keeping the default settings if you’re not sure how to set them.
  • Page 64 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish the default settings on the following screen. To configure one interface with the default gateway, select and move the interface from Available Routed WAN Interfaces into Selected Default Gateway Interfaces. To cancel the interface as the selected default gateway interface, select and move the interface from the Selected Default Gateway Interfaces into Available Routed WAN Interfaces.
  • Page 65 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the IPoA connection is successful, you can access the Internet.  Steps 1~7 above for IPoA Users...
  • Page 66 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.2.2 For ETH Interface Following 7 modes are for you to choose according to your actual Internet service. PPPoE 1) IPv4 Only 2) IPv4&IPv6 (Dual Stack) 3) IPv6 Only IPoE 4) IPv4 Only 5) IPv4&IPv6 (Dual Stack)
  • Page 67 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish PPP Username and Password and other settings on the figure below. Click Next.  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway...
  • Page 68 Wireless AC1200 ADSL2+ Dual Band Modem Router default setting is recommended. Then click Next.  To configure the WAN DNS address, click the Select DNS Server Interface from available WAN interfaces option, or select the Use the following Static DNS IP address option and enter the static DNS server IP addresses provided by...
  • Page 69 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.
  • Page 70 Wireless AC1200 ADSL2+ Dual Band Modem Router  Steps 1~6 above for PPPoE and IPv4 Only users --------------------------------------------------------------------------------------------------------------------------- 2) PPPoE IPv4&IPv6 (Dual Stack) Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.
  • Page 71 Wireless AC1200 ADSL2+ Dual Band Modem Router  Configure PPP Username and Password and other settings on the figure below. Each field with its indication is  mentioned above in PPPoE and IPv4 users- section. If ISP provides you no static IPv4 or IPv6 address, you just keep the default settings for it’s by default the DHCP mode.
  • Page 72 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address. Then click Next.
  • Page 73 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.  Click Apply/Save to save your settings if everything is correctly set.
  • Page 74 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.  Steps 1~6 above for PPPoE and IPv4&IPv6 (Dual Stack) users ------------------------------------------------------------------------------------------------ 3) PPPoE IPv6 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.
  • Page 75 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv6 Only. Click Next.  Configure PPP Username and Password and other settings on the figure below. Each field with its indication is mentioned above in PPPoE and IPv4 users section.
  • Page 76 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the WAN gateway address in Selected WAN Interface box. Then click Next.
  • Page 77 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP.
  • Page 78 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the PPPoE connection is successful, you can access the Internet.  Steps 1~6 above for PPPoE and IPv6 Only users --------------------------------------------------------------------------------------------------------------------------- 4) IPoE IPv4 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.
  • Page 79 Wireless AC1200 ADSL2+ Dual Band Modem Router default. Select a network protocol: IPv4 Only. Click Next.  Finish WAN IP Settings on the figure below. Click Next.  Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next.
  • Page 80 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway address in Available Routed WAN Interfaces box and move it into Selected Default Gateway Interfaces box. The default setting is recommended.
  • Page 81 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set. ...
  • Page 82 Wireless AC1200 ADSL2+ Dual Band Modem Router Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv4 Only users --------------------------------------------------------------------------------------------------------------------------- 5) IPoE IPv4&IPv6 (Dual Stack) Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.
  • Page 83 Wireless AC1200 ADSL2+ Dual Band Modem Router  To finish WAN IP Settings, select Obtain an IP/IPv6 address automatically, check Dhcpv6 Prefix Delegation (IAPD). If your ISP is using stateful DHCPv6, check Dhcpv6 Address Assignment (IANA) also. Or select Use the...
  • Page 84 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next.  To configure the Default Gateway interface, select the interface that you want to configure with the WAN gateway...
  • Page 85 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, finish both the IPv4 setting and IPv6 setting. Click Next.  Click Apply/Save to save your settings if everything is correctly set.
  • Page 86 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv4&IPv6 (Dual Stack) Users -------------------------------------------------------------------------------------------------- 6) IPoE IPv6 Only Users If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start to set up WAN service for accessing the Internet.
  • Page 87 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select IP over Ethernet (IPoE). Edit the Enter Service Description field which is optional. Suggest you keep the default. Select a network protocol: IPv6 Only. Click Next.  Finish WAN IP Settings on the figure below. Click Next.
  • Page 88 Wireless AC1200 ADSL2+ Dual Band Modem Router  Finish Network Address Translation Settings. Suggest to keep the default settings. Click Next.  To configure the Default Gateway interface when using IPv6, select the interface that you want to configure with the...
  • Page 89 Wireless AC1200 ADSL2+ Dual Band Modem Router  To configure the WAN DNS address, check the Obtain IPv6 DNS info from a WAN interface option, or select the Use the following Static IPv6 DNS address option to enter the static DNS server IPv6 addresses provided by your ISP.
  • Page 90 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save to save your settings if everything is correctly set.  Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.  Steps 1~7 above for IPoE and IPv6 Only Users...
  • Page 91 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select the ETH interface you added just now from the pull-down menu in the figure below. Click Next.  Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep...
  • Page 92 Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can view your configurations. Click Apply/Save to save your settings if everything is correctly set.  When the connection is successful, you can access the Internet.
  • Page 93 Wireless AC1200 ADSL2+ Dual Band Modem Router  Steps 1~3 above for Bridging Users --------------------------------------------------------------------------------------------------------------------------------------------------- 2.3 LAN Click Advanced > LAN to configure the LAN IP Address and Subnet Mask. This IP address is to be used to access the device’s settings through a web browser.
  • Page 94 Wireless AC1200 ADSL2+ Dual Band Modem Router  IP Address/Subnet Mask: The device's LAN IP address and subnet mask that both you can change to fit your network. The default IP address is 192.168.1.1. Once you change the LAN IP address, you need to use the new address to login to the Management page to configure the modem router.
  • Page 95 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.3.2 IPv6 Autoconfig IPv6 address can only be Aggregatable Global Unicast Addresses and Unique Local Address. Link-Local Unicast Addresses and Multicast Addresses are not permitted. Click Advanced > LAN > IPv6 Autoconfig to enter the IPv6 address setting page.
  • Page 96 Wireless AC1200 ADSL2+ Dual Band Modem Router When computers get the message, they will take the router’s IP address as the secondary route for easy use. In addition, checking RADVD can also broadcast the prefix address generated from the computer in the LAN.
  • Page 97 Wireless AC1200 ADSL2+ Dual Band Modem Router server, but the firewall and NAT function of your router stop visitors from accessing computers in the LAN. Solution: Set virtual server rules to allow visitors to access the server via WAN IP address of your router.
  • Page 98 Wireless AC1200 ADSL2+ Dual Band Modem Router Protocol: Select the protocol from the Protocol drop-down list. If you are unsure, select TCP/UDP. Internal Port Start/Internal Port End: The ports used by the server in the LAN. After all the configurations, visitors on the Internet can access your server by simply using “Protocol Name://WAN IP address: External Port”.
  • Page 99 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select the WAN interface ipoe_eth/eth0.1 here.  Input the word web in the Custom Service field. Then manually enter the port number 10480 in the External Port Start and External Port End fields, and enter the port number 8090 in the Internal Port Start and Internal Port End fields.
  • Page 100 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Apply/Save next to the Server IP Address or click Apply/Save next to the port number table. Result: Your friend on the Internet will be able to access your web server simply by entering “http://1.2.3.4:10480” in browser.
  • Page 101 Wireless AC1200 ADSL2+ Dual Band Modem Router Here in the Port Triggering interface, you can configure the port settings by selecting an existing application or creating your own (Custom application).  User Interface: Select the WAN interface you will use to visit the server in your LAN.

  • Page 102: Dmz Host

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.4.3 DMZ Host The default DMZ (De-Militarized Zone) host feature is helpful when you are using some online games and videoconferencing applications that are not compatible with NAT (Network Address Translation). Note that enabling DMZ host means the built-in firewall of your router takes no effect, and your computer that’s set as the DMZ host will...

  • Page 103: Security

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.5 Security 2.5.1 IP Filtering  Outgoing IP Filtering Setup If you want to limit computers in the LAN to access the Internet, go to Outgoing section to set the router. Click Advance Setup > Security > IP Filtering > Outgoing, and then click Add to configure outgoing IP filters.
  • Page 104 Wireless AC1200 ADSL2+ Dual Band Modem Router  Source IP address [/prefix length]: Enter the LAN IP address to be filtered.  Source Port (port or port: port): Specify a port number or a range of ports used by LAN PCs to access the Internet.
  • Page 105 Wireless AC1200 ADSL2+ Dual Band Modem Router  Filter Name: Specify a new filter name for identifying the incoming IP traffic.  IP Version: Select either IPv4.  Protocol: TCP/UDP, TCP, UDP and ICMP are available for your option. ...

  • Page 106: Parental Control

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Here you can create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple conditions are specified, all of them take effect.  Protocol Type: Select a protocol type from the drop-down list.
  • Page 107 Wireless AC1200 ADSL2+ Dual Band Modem Router  Browser's MAC Address: This section will automatically add the MAC address of the attached LAN device where the browser is running.  Other MAC Address: Specify MAC address of the computer which you want to apply Internet access restriction to.

  • Page 108: Bandwidth Control

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.7 Bandwidth Control Click Advanced Setup > Bandwidth Control, and check Bandwidth Control to enable this feature on the screen.  Up to 16 entries can be allowed.  Description: Enter the description of the controlled host.

  • Page 109: Routing

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Add: Aftre finishing the bandwidth control settings, click Add to generate the control rule.  Apply/Save: Click this button to activate your configurations. 2.8 Routing 2.8.1 Default Gateway This section is to set the default forwarding interface of the data in the same network segment of the WAN IP or LAN IP of your modem router.
  • Page 110 Wireless AC1200 ADSL2+ Dual Band Modem Router 2.8.2 Static Route It is not recommended to use this setting unless you are familiar with static routing. In most cases, dynamic routing is recommended, because this feature allows the router to detect the physical changes of the network layout automatically.
  • Page 111 Wireless AC1200 ADSL2+ Dual Band Modem Router the specified network 2.2.3.3, 255.255.0.0 can be expressed as “2.2.0.0/16” indicating all hosts that starts with “2.2”.  Interface: Select an interface from the drop-down list according to your need. This interface can be the one on the LAN side or WAN side that data will forwarded out by.
  • Page 112 Wireless AC1200 ADSL2+ Dual Band Modem Router In this case, you should go to Advanced Setup > WAN Service > Network Address Translation Settings to disable NAT. Then go back here. You should be displayed with the following figure. Operation-Passive indicates the RIP-enabled router will automatically tell other surrounding RIP-enabled routers the newest route table and share the newest route table with them.
  • Page 113 Wireless AC1200 ADSL2+ Dual Band Modem Router  Check the Select DNS Server Interface from available WAN interfaces option OR select the Use the following Static DNS IP address option and enter static DNS server IP addresses for the system.
  • Page 114 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select the Obtain IPv6 DNS info from a WAN interface option, and select a configured WAN interface for the IPv6 DNS server information. Or select the Use the following Static IPv6 DNS address option and enter the static IPv6 DNS server Addresses.
  • Page 115 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click the Add button to configure the DDNS settings.  D-DNS Provider: Select your DDNS service provider from the drop-down menu.  Hostname: Enter the DDNS domain name registered with your DDNS service provider.
  • Page 116 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select DynDNS.org from the D-DNS provider drop-down menu.  Enter the Dyndns hostname, xhh3793.dyndns.org.  Specify the WAN connection interface, ipoe_eth0/eth0.1.  Enter the DynDNS username, qiangweianbian.  Enter the password of your DynDNS.org account, 414637.
  • Page 117 Wireless AC1200 ADSL2+ Dual Band Modem Router The best DSL configurations are the factory defaults. Only change them if you are instructed by your ISP or our technical staff when your router fails to negotiate with ISP in DSL (ATM) mode. Usually, this failure can be identified and confirmed if the ADSL LED on the device keeps displaying a slow or quick blinking light.

  • Page 118: Upnp

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Tone Selection to enter the prompt window below. If you are unsure about the ADSL parameters, please apply the factory default settings. Wrong configurations may fail your Internet access. 2.11 UPnP UPnP (Universal Plug and Play) allows Windows based systems to configure the device for various Internet applications automatically.

  • Page 119: Print Server

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Enable UPnP: Check/uncheck to enable/disable the UPnP feature.  Click Apply/Save. Note UPnP is activated only when there is a live WAN service with NAT enabled. 2.12 Print Server Enabling Print Server makes all PCs on the LAN have an access to the USB printer which has been connected to this router.
  • Page 120 Wireless AC1200 ADSL2+ Dual Band Modem Router  Enable USB printing service of the device (the router). First, enter the name of the USB printer in Printer name box. Then, enter the manufacturer and model of the USB printer in the Make and model box.
  • Page 121 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 3: Select A network printer, or a printer attached to another computer and click Next; Step 4: Select Connect to a printer on the Internet or on a home or office network;...
  • Page 122 Wireless AC1200 ADSL2+ Dual Band Modem Router Note Here “192.168.1.1” refers to this router’s LAN IP address and “hp3845” refers to the USB printer name you’ve filled in on the Print Server Settings page. Step 5: Insert the printer driver CD into your computer and click Have Disk…;...
  • Page 123 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 7: Select the manufacturer and the model of your printer. And click OK. Step 8: Choose “Yes” or “No” for default printer setting and click Next.
  • Page 124 Wireless AC1200 ADSL2+ Dual Band Modem Router Step 9: Click Finish. Check the status of printer from Windows “Control Panel”, printer window. Status should be shown “ready”.

  • Page 125: Storage Service

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.13 Storage Service This section helps you to use USB Storage devices in your modem router, including the following parts: • You can control the LAN users’ accessing to the USB storage device information, namely, some of User Account: them can access the USB device info but others cannot.
  • Page 126 Wireless AC1200 ADSL2+ Dual Band Modem Router  Username: Name your USB storage account.  Password: Specify a password to secure your USB storage account.  Confirm Password: Enter your password again for a confirmation.  VolumeName: Enter the volume name of the USB storage, which is displayed in the Storage Device Info page.
  • Page 127 Wireless AC1200 ADSL2+ Dual Band Modem Router After your modem router recognizes the USB storage device, follow guidelines below for visiting the storage info via the computer on the LAN. Here takes Windows 7 as an example to explain the guidelines which are similar in other operation systems.

  • Page 128: Interface Grouping

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Account authentication: Enter your user account name and password which were configured in User Account part in the corresponding box, and click OK. Then you can see the detailed info within the USB device.
  • Page 129 Wireless AC1200 ADSL2+ Dual Band Modem Router  Click Add to enter the screen below. Group Name: The name of a configured rule. WAN Interface used in the grouping: WAN connection to which the interface grouping rules apply. Available LAN Interfaces: LAN interfaces that can be used for interface grouping.
  • Page 130 Wireless AC1200 ADSL2+ Dual Band Modem Router  Enter the Group name which should be unique.  Select the WAN interface that’s shared by the LAN interfaces in the interface group.  Select interfaces that will be connected to the specified WAN you will use. Note that these clients may obtain public IP addresses.

  • Page 131: Ip Tunnel

    Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. After the settings above, you need to reboot the modem router to take the settings into effect. 2. After the settings above, the LAN IP address used by the Default group member is 192.168.1.1, the LAN IP of the second group member is 192.168.2.1.
  • Page 132 Wireless AC1200 ADSL2+ Dual Band Modem Router  Tunnel Name: Specify the name of the tunnel.  Mechanism: Currently, only 6RD configuration is supported.  Associated WAN Interface: Specify the WAN interface of the tunnel.  Associated LAN Interface: Specify the LAN interface of the tunnel.

  • Page 133: Certificate

    Wireless AC1200 ADSL2+ Dual Band Modem Router  Tunnel Name: Specify the name of the tunnel.  Mechanism: Currently, only DS-Lite configuration is supported.  Associated WAN Interface: Specify the WAN interface of the tunnel.  Associated LAN Interface: Specify the LAN interface of the tunnel.
  • Page 134 Wireless AC1200 ADSL2+ Dual Band Modem Router To create a certificate signing request:  Click the Create Certificate Request button to enter the page below.  Specify the Common Name, Organization Name and State/Province Name  Enter the 2-letter Country Code for the certificate.
  • Page 135 Wireless AC1200 ADSL2+ Dual Band Modem Router To Import certificate：  Click the Import Certificate button on the local certificates page to enter the page below.  Enter the certificate name.  Paste the certificate content and private key. ...
  • Page 136 Wireless AC1200 ADSL2+ Dual Band Modem Router To Import certificate：  Click the Import Certificate button to enter the page below.  Enter the certificate name.  Paste the certificate content.  Click Apply to apply your settings.

  • Page 137: Multicast

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.17 Multicast To configure IGMP for IPv4  Check the LAN to LAN (Intra LAN) Multicast Enable box.  Check the Membership Join Immediate (IPTV) box. This is only required for IPTV. ...

  • Page 138: Iptv

    Wireless AC1200 ADSL2+ Dual Band Modem Router 2.18 IPTV If you check the Enable IPTV checkbox, you must choose a layer2 interface, and then configure the PVC/VLAN info (ATM), or ETH port/VLAN info (ETH). Click Apply/Save button to save it.

  • Page 139: Wireless

    Wireless AC1200 ADSL2+ Dual Band Modem Router IPTV configuration for Phone Cable Access user: Enable IPTV. Select Layer2 interface: ATM Interface. Configure an avaliable VPI/VCI value which should be provided by your ISP. Click Apply/Save. IPTV configuration for Ethernet Cable Access user: Enable IPTV.
  • Page 140 Wireless AC1200 ADSL2+ Dual Band Modem Router 3.1.1 Basic Click Wireless > 2.4G > Basic to enter the page where you can configure the basic settings of the wireless network of 2.4GHz. Enable Wireless: check/uncheck to enable/disable the wireless network of 2.4GHz.
  • Page 141 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS Setup Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings.
  • Page 142 Wireless AC1200 ADSL2+ Dual Band Modem Router Network Authentication: Select Open, Shared, 802.1X, WPA-PSK, WPA2-PSK or Mixed WPA/ WPA2-PSK from the drop-down list to encrypt your wireless network. Depending on the type of network authentication you select, you will be prompted to enter corresponding settings.
  • Page 143 Wireless AC1200 ADSL2+ Dual Band Modem Router MAC Restrict Mode：Disabled, Allow and Deny Allow: Allow only PCs at specified MAC addresses (in the list) to connect to your wireless network.  Deny: Block only PCs at specified MAC addresses from connecting to your wireless network.
  • Page 144 Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. If you select “Allow” MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be filtered, WPS will be disabled (You can go to Wireless > Security to check WPS status).
  • Page 145 Wireless AC1200 ADSL2+ Dual Band Modem Router functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. Bridge Action: There are three options available: Enabled, Enabled (Scan) and Disabled. Select Disabled in Bridge Action which disables wireless bridge restriction.
  • Page 146 Wireless AC1200 ADSL2+ Dual Band Modem Router Enable Wireless: check/uncheck to enable/disable the wireless network of 5GHz. Hide Access Point: This option allows you to have your wireless network names (SSID) publicly broadcast or if you choose to enable it, the SSID will be hidden.
  • Page 147 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS Setup Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings.
  • Page 148 Wireless AC1200 ADSL2+ Dual Band Modem Router WPS (hardware button): Press the hardware WPS button on the device for 1 second and the WPS LED will keep blinking for about 2 minutes. Within the 2 minutes, press the WPS button on your wireless computer or other device.
  • Page 149 Wireless AC1200 ADSL2+ Dual Band Modem Router WPA/WAPI passphrase: Enter a WPA/WAPI network key. WPA Group Rekey Interval: Specify a key update interval. WPA/WAPI Encryption: Select TKIP, AES, or TKIP+AES. Apply/Save: Click it to apply the current configurations. 3.2.3 MAC Filter Click Wireless >...
  • Page 150 Wireless AC1200 ADSL2+ Dual Band Modem Router Note 1. If you select “Allow” MAC restrict mode and directly click Apply/Save instead of adding any MAC address to be filtered, WPS will be disabled. 2. If you want to change the MAC filter mode above from “Allow” to “Deny”, just select Deny and click Apply/Save.
  • Page 151 Wireless AC1200 ADSL2+ Dual Band Modem Router AP Mode: You can select Wireless Bridge (also known as Wireless Distribution System) to disable access point functionality. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP.

  • Page 152: Diagnostics

    Wireless AC1200 ADSL2+ Dual Band Modem Router 4. Diagnostics 4.1 Diagnostics The modem router is capable of testing the connection to your DSL service provider, the connection to your Internet service provider and the connection to your local network. If a test displays a fail status, click "Rerun Diagnostic Tests"...

  • Page 153: Management

    Wireless AC1200 ADSL2+ Dual Band Modem Router 5. Management 5.1 Settings 5.1.1 Backup Here you can save a copy of your device’s configurations to your computer. Once you have configured the device, you can save these settings to a configuration file on your local hard drive. The configuration file can later be imported to your device in case the device is reset to factory default settings.
  • Page 154 Wireless AC1200 ADSL2+ Dual Band Modem Router Note The backup file is named as “backupsettings” and suffixed by .conf. For better memorizing, you can change the name, but do not change the file suffix. 5.1.2 Restore Backup Here you can restore the configuration from a file saved on your PC.

  • Page 155: System Log

    Wireless AC1200 ADSL2+ Dual Band Modem Router 5.1.3 Restore Default Under some circumstances (for example, you cannot visit a website or unfortunately forget the login password), you may need to remove the existing configuration and restore the factory default settings.

  • Page 156: Snmp Agent

    Wireless AC1200 ADSL2+ Dual Band Modem Router To configure the System Log, click Configure System Log. Log: If Enable is selected, the system will begin to log all the selected events. Log Level: All events above or equal to the selected level will be logged.

  • Page 157: Internet Time

    Wireless AC1200 ADSL2+ Dual Band Modem Router To configure SNMP Agent:  Enable SNMP agent.  Configure the read operation command between SNMP management and SNMP agent. Read Community-SNMP agent allows SNMP management to read variable in MIB with read community.

  • Page 158: Access Control

    Wireless AC1200 ADSL2+ Dual Band Modem Router Time Server: Internet time server domain. To configure Internet time:  Check Automatically synchronize with Internet time servers box.  Select a NTP time server from the drop-down list. If the NTP time server you are looking for is not included in the list, select “Other”...

  • Page 159: Update Firmware

    Wireless AC1200 ADSL2+ Dual Band Modem Router Apply/Save: Click this button to save configurations. Note Password cannot contain a space. 5.5.2 Access Control - Service Here you can manage the device either from LAN or WAN side using HTTP, ICMP, TELNET, and SNMP.

  • Page 160: Reboot

    Wireless AC1200 ADSL2+ Dual Band Modem Router To update software, do as follows:  Download the latest firmware from our website: www.tendacn.com.  Click the "Browse" button to locate and upload the firmware file.  Click the "Update Software" button to start updating.

  • Page 161: Appendix 1 Configure Your Pc

    Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 1 Configure Your PC Screens to configure TCP/IP properties in other Operating Systems are similar to those below. Windows 8  Right click the icon on the bottom right corner of your desktop.
  • Page 162 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.   Click OK on the Ethernet Properties window (see for the screenshot).

  • Page 163: Windows 7

    Wireless AC1200 ADSL2+ Dual Band Modem Router Windows 7  Click the icon on the bottom right corner of your desktop.  Click Open Network and Sharing Center. If you cannot find the icon on the bottom right corner of your desktop, follow steps below: Click Start -> Control Panel ->...
  • Page 164 Wireless AC1200 ADSL2+ Dual Band Modem Router  Select Obtain an IP address automatically and Obtain DNS server address automatically and click OK.   Click OK on the Local Area Connection Properties window (see for the screenshot).

  • Page 165: Windows Xp

    Wireless AC1200 ADSL2+ Dual Band Modem Router Windows XP  Right click My Network Places on your desktop and select Properties.  Right click Local Area Connection and select Properties.  Scroll down to find and double click Internet Protocol (TCP/IP).
  • Page 166 Wireless AC1200 ADSL2+ Dual Band Modem Router   Click OK on the Local Area Connection Properties window (see for the screenshot). Click on the Apple icon from the top-left corner and select System Preferences. ...
  • Page 167 Wireless AC1200 ADSL2+ Dual Band Modem Router ...

  • Page 168: Appendix 2 Wifi Connection

    Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 2 WiFi Connection Windows 8  Click the icon on the bottom right corner of your desktop.  Select your wireless network from the list, click Connect and then follow onscreen instructions.
  • Page 169 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows 7 1. Click the icon on the bottom right corner of your desktop. 2. Double click your SSID (wireless network name) and then follow onscreen instructions. 3. When your SSID (wireless network name) displays Connected as shown below, you’ve connected to it for Internet...
  • Page 170 Wireless AC1200 ADSL2+ Dual Band Modem Router Windows XP 1. Right click My Network Places, and select Properties. 2. Right click Local Area Connection, and select View Available Wireless Networks from the pop-up submenu. 3. Select your wireless network from the list and then follow onscreen instructions.
  • Page 171 Wireless AC1200 ADSL2+ Dual Band Modem Router 4. When your SSID (wireless network name) displays Connected as shown below, you’ve connected to it for Internet access successfully. Click > System Preferences.
  • Page 172 Wireless AC1200 ADSL2+ Dual Band Modem Router   ...

  • Page 173: Iphone/Ipad

    Wireless AC1200 ADSL2+ Dual Band Modem Router iPhone/iPad  ...
  • Page 174 Wireless AC1200 ADSL2+ Dual Band Modem Router ...

  • Page 175: Appendix 3 Faqs

    Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 3 FAQs 1. I cannot access the device's management interface. What should I do? 1) Verify the physical connection (namely, the Ethernet cable) between your PC and the device. For details, see Chapter 2 Hardware Install hereof.
  • Page 176 Wireless AC1200 ADSL2+ Dual Band Modem Router 2) Log in to the device, select Wireless > 2.4G/5G > Basic and change the wireless network name (SSID). Then connect again. 3) Log in to the device, select Wireless > 2.4G/5G > Security and change the security settings. Then connect again.

  • Page 177: Appendix 4 Vpi/Vci List

    Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 4 VPI/VCI List The following table lists common ISPs and their VPI and VCI numbers. If you cannot locate your ISP and their VPI and VCI information here, ask your ISP to provide it.
  • Page 178 Wireless AC1200 ADSL2+ Dual Band Modem Router Brazil Telmar PPPoE LLC Brazil South Region PPPoE LLC Canada Primus Canada PPPoE LLC Canada Rogers Canada (1) PPPoE LLC Canada Rogers Canada (2) 1483 Bridged IP LLC Canada Rogers Canada (3) 1484 Bridged IP LLC...
  • Page 179 Wireless AC1200 ADSL2+ Dual Band Modem Router Hungary Sci-Network PPPoE LLC Iceland Islandssimi PPPoA VC-MUX Iceland Siminn PPPoA VC-MUX India Airtel 1483 Bridged IP LLC India BSNL 1483 Bridged IP LLC India MTNL 1483 Bridged IP LLC RELIANCE India PPPoE LLC...
  • Page 180 Wireless AC1200 ADSL2+ Dual Band Modem Router Italy 1483 Bridged IP LLC Italy PPPoA VC-MUX Jamaica (1) PPPoA VC-MUX Jamaica (2) PPPoA VC-MUX Jamaica (3) 1483 Bridged IP LLC SNAP Jamaica (4) 1483 Bridged IP LLC SNAP Kazakhtelecom Kazakhstan LLC/SNAP Bridging «...
  • Page 181 Wireless AC1200 ADSL2+ Dual Band Modem Router Portugal PPPoE LLC Puerto Rico Coqui.net PPPoA LLC RomTelecom Romania: 1483 Bridged IP LLC Russia Rostel PPPoE LLC Russia Port telecom PPPoE LLC Russia VNTC PPPoE LLC Saudi Arabia (1) PPPoE LLC Saudi Arabia (2)
  • Page 182 Wireless AC1200 ADSL2+ Dual Band Modem Router Spain Uni2 1483 Bridged IP VC-MUX Spain Orange 1483 Bridged IP VC-MUX Spain Orange 20 Megas LLC-BRIDGING Spain Orange 1483 Bridged IP LLC/SNAP Spain Ya.com 1483 Bridged IP VC - MUX Spain Ya.com...
  • Page 183 Wireless AC1200 ADSL2+ Dual Band Modem Router United States AT&T (3) 1483 Bridged IP LLC United States August.net (1) 1483 Bridged IP LLC United States August.net (2) 1483 Bridged IP LLC United States BellSouth PPPoE LLC United States Casstle.Net 1483 Bridged IP LLC...
  • Page 184 Wireless AC1200 ADSL2+ Dual Band Modem Router United States Sprint (2) PPPoE LLC United States Sprint Territory PPPoE LLC SureWest United States 1483 Bridged LLC Snap Communications(1) SureWest United States PPPoE LLC Communications(2) SureWest United States PPPoA LLC Communications(3) United States Toast.Net...

  • Page 185: Appendix 5 Regulatory Compliance Information

    Wireless AC1200 ADSL2+ Dual Band Modem Router Appendix 5 Regulatory Compliance Information CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. This device complies with EU 1999/5/EC.
  • Page 186 Wireless AC1200 ADSL2+ Dual Band Modem Router NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.

Table of Contents

Save PDF