2.2.1 For ATM Interface
Following 11 modes are for you to choose according to your actual Internet service.
EoA
PPPoA
IPoA
1) PPPoE IPv4 Only Users
If you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, then you can start to set up
WAN service for accessing the Internet.
Click Advanced Setup > WAN Service and then click the Add button.
Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.
Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep
the default. Select a network protocol: IPv4 Only. Click Next.
PPPoE
1)
IPv4 Only
IPoE
4)
IPv4 Only
7)
Bridging
PPPoA
8)
IPv4 Only
11)
IPoA
Wireless AC1200 ADSL2+ Dual Band Modem Router
2)
IPv4&IPv6(Dual Stack)
5)
IPv4&IPv6(Dual Stack)
9)
IPv4&IPv6(Dual Stack)
20
3)
IPv6 Only
6)
IPv6 Only
10)
IPv6 Only