Wireless AC1200 ADSL2+ Dual Band Modem Router
Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep
the default. Select a network protocol: IPv6 Only. Click Next.
Configure PPP Username and Password and other settings on the figure below. Each field with its indication is
mentioned above in PPPoE and IPv4 users section.
If ISP provides you no static IPv6 address, you just keep the default settings for it's by default the DHCP mode.
Check Launch Dhcp6c for Prefix Delegation (IAPD).
If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Click Next.
71