Quick Setup; Hardware Install; 4G Router Mode - Tenda 4G600 User Manual

1 Hardware Install

You can either connect to the device wirelessly or using Ethernet cables. Select
an install method according to your network environment.
A. If you access the Internet via a 3G/4G USB modem, see 3G/4G Router
Mode.
B. If you access the Internet by connecting the device to the Ethernet cable
from the incoming Internet side, see Wireless Router Mode.
C. If you acquire Internet access from a remote AP on an existing netwo rk, see
Universal Repeater Mode.
Note
①
DO NOT expose the device to heat sources .
②
Disconnect the device from power supply in thunderstorm weather.
③
Keep the device away from electrical appliances (such as electromagnetic
cooker and cordless phone, etc .) to avoid electromagnetic interference .
3G/4G Router Mode
By connecting an activated 3G/4G USB modem to your device and it gives you
the freedom to roam while staying connected to the Internet.
①
Insert a 3G/4G USB modem to the device.
②
Connect the device to a power outlet.
③
Connect your desktop, notebook and smart phone, etc. to the device.
II Quick Setup | Tenda
5
II Quick Setup