Tenda wireless modem router user guide (103 pages)
Summary of Contents for Tenda AC8
Page 1
Quick Installation Guide AC1200 Dual Band Gigabit WiFi Router Package Contents - Wireless Router x 1 - Power Adapter x 1 - Ethernet Cable x 1 - Quick Installation Guide x 1 Please read this guide before you start with the quick setup upon the first use. This guide instructs how to install and connect the device.
Page 2
Step 1: Import Your PPPoE User Name and Password into the New Router (Optional) Tips This function is only applicable when the connection type of the original router is PPPoE. Power source ➊ WPS/RST IPTV/3 WPS/RST IPTV/3 POWER Power source New router ➋...
Page 3
Step 2: Connect the Router to the Internet ➊ Power source Internet WPS/RST IPTV/3 POWER WiFi-enabled device IPTV/3, 2, 1 SSID: Tenda_XXXXXX Modem (such as optical modem) Serial No. WLAN Settings Tenda_XXXXXX WLAN SSID Tenda_XXXXXX Pin No. 12345678 OTHER… ➋ ➌...
Page 4
Step 3: Set up the Router ➊ Launch a web browser on a smartphone or computer connected to the router, visit tendawifi.com to enter the web UI, and then click Start (computer used as an example). tendawifi.com Welcome Quick Setup Wizard Start Tips If the web UI does not appear, refer to Q1 in FAQ.
Page 5
➌ Set WiFi name, WiFi password and login password of the router, and then click Next. WiFi Settings Tenda_XXXXXX Not Required WiFi password of 8-32 characters Set the WiFi password as the login password of the admin account. Login password of 5-32 characters Not Required Next Tips...
Page 6
LED Indicators/Buttons/Ports/Jack Tips Desktop mounting: The device must be horizontally mounted for safe use. Wall-mounting: - Recommended specifications of the plastic screws and anchors: Screw: PA3*14 mm; head diameter: 5.2 mm; Anchor: outer diameter: 6.6 mm; inner diameter: 2.4 mm; length: 26.4 mm. - The equipment is only suitable for mounting at heights ≤...
Page 7
WPS/RST IPTV/3 WPS/RST IPTV/3 POWER Button/ Description port/jack Used to start the WPS negotiation process, or to reset the router. - WPS: Press the button of the router for 1 to 3 seconds. Within 2 minutes, enable the WPS function of the other WPS-supported device to establish a WPS connection.
Page 8
Q1: I cannot log in to the web UI of the router by visiting tendawifi.com. What should I do? A1: Try the following solutions: - If you are using a WiFi-enabled device, such as a smartphone: • Ensure that it connects to the WiFi network of the router. •...
Page 9
Q4: Why cannot I find the WiFi signal of the router? A4: Connect your computer to port 1, 2 or IPTV/3 of the router to log in to the web UI. Navigate to WiFi Settings and try the following methods: - Ensure that the wireless function is enabled.
RJ45 cable. Declaration of Conformity Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.tendacn.com/download/list-9.html...
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Caution: Adapter Model: BN073-A12012E, BN073-A12012B, BN073-A12012U Manufacturer: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD. Input: 100-240V AC 50/60Hz 0.4A Output: 12V DC, 1A : DC Voltage Safety Precautions Before performing an operation, read the operation instructions and precautions to be taken, and follow them to prevent accidents. The warning and danger items in other documents do not cover all the safety precautions that must be followed.
Page 13
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.