Tenda AC1200 User Manual page 143

MAC Restrict Mode：Disabled, Allow and Deny
Allow: Allow only PCs at specified MAC addresses (in the list) to connect to your wireless network.

Deny: Block only PCs at specified MAC addresses from connecting to your wireless network.

Disabled: Disable MAC filter feature.

Add: Click to add a MAC address.
Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click
this button.
Example: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as
follows:

Select Allow.

Click the Apply/Save button.

Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below and click Apply/Save.
Wireless AC1200 ADSL2+ Dual Band Modem Router
139