Tenda AC1200 User Manual page 97

server, but the firewall and NAT function of your router stop visitors from accessing computers in the LAN.
Solution: Set virtual server rules to allow visitors to access the server via WAN IP address of your router.
Click Advanced Setup > NAT > Virtual Servers to enter the virtual server setup page. Click Add to add rules.

User Interface: Select the WAN interface you will use to visit the server in your LAN.

Configure the Service Name > Select a Service option to select an existing service (Select One here is only an
express to tell you select one service.) from the drop-down list. And then the corresponding external/internal start/end
port will prompt automatically

Server IP Address: Enter the IP address of your local computer that will provide this service.

Click Apply/Save next to the Server IP Address or click Apply/Save next to the port number table.
Other fields' introduction that may help:
External Port Start/External Port End: Server ports provided for Internet users accessing the LAN.
Or configure Service Name > Custom Service to customize a service manually.
.
Wireless AC1200 ADSL2+ Dual Band Modem Router

93