Pppoe Ipv4&Ipv6 (Dual Stack) Users - Tenda AC1200 User Manual

 Steps 1~6 above for PPPoE and IPv4 Only users
2) PPPoE IPv4&IPv6 (Dual Stack) Users
If you configure the ETH Interface (Ethernet uplink) and select eth0/eth0 as the ETH WAN interface, then you can start
to set up WAN service for accessing the Internet.

Click Advanced Setup > WAN Service and then click the Add button.

Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.

Select PPP over Ethernet (PPPoE). Edit the Enter Service Description field which is optional. Suggest you keep
the default. Select a network protocol you need: IPv4&IPv6 (Dual Stack). Click Next.
Wireless AC1200 ADSL2+ Dual Band Modem Router
---------------------------------------------------------------------------------------------------------------------------
66