Layer2 Interface - Tenda D301 User Manual

• UPnP
• Print Server
• Storage Service
• Interface Grouping
• IP Tunnel
• Certificate
• Multicast
• IPTV

4.2.1 Layer2 Interface

Click Advanced Setup -> Layer2 Interface to enter the Layer2 Interface screen.
This router provides two Layer2 Interfaces:
- ATM Interface for ADSL broadband Internet service
- ETH Interface for connecting to Internet via an Ethernet cable.
By default, system applies the ATM Interface (ADSL uplink).
If you directly connect to the ADSL line via a phone cable, first refer to
To setup WAN Service for ATM
Or if you connect to Internet via a fiber/cable modem using an Ethernet cable, first refer to
and then skip to To setup WAN Service for ETH
To set up the ATM interface
Select ATM Interface and click Add to configure it.
Interface.
Interface.
- 18 -
Wireless Modem Router User Guide
To set up the ATM interface
To set up the ETH interface
and then skip to